EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of Biogenic Material Content on the Biodegradability of Styrene-Butadiene Composites with Incorporated Chlorella vulgaris Biomass

Marius Bumbac iD, Cristina Mihaela Nicolescu iD, Traian Zaharescu iD, Costel Bumbac iD, Elena Elisabeta Manea, Ioana Alexandra Ionescu, Ion Valentin Gurgu, Bogdan-Catalin Serban, Octavian Buiu iD, Crinela Dumitrescu

Polymers · 29.04.2024 · 16 (9) · 1241

DOI: 10.3390/polym16091241 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 29.04.2024. Verfasst von Marius Bumbac und 9 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Science and Arts, Valahia University of Targoviste, 13 Aleea Sinaia, 130004 Targoviste, Dambovita, Romania. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 66 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: EEA and Norway Grants, Romanian Ministry of Research, Innovation and Digitization, Excellence and Performance to Increase the RDI Institutional Capacity (Pro Excellence).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Bio-fillers are intensively studied for advanced polymer composite circular design and production. In this context, the algal biomass may be considered an important and relatively low-cost resource, when harvested as a by-product from wastewater treatment plants. The biomass of the algal species Chlorella vulgaris is frequently used in this type of environmental process, and its macro constituents’ composition ranges from around 15–25% carbohydrates, 10–20% lipids, and 50–60% proteins. Poly (styrene-butadiene-styrene) (SBS) copolymers have a matrix composed of glassy polystyrene domains connected by flexible polybutadiene segments. Although the physical-mechanical properties of SBS copolymers recommend them for many industrial applications, they have the drawback of low biodegradability. This study aimed to assess the aerobic biodegradability of polymer composites by integrating biomass from Chlorella vulgaris at varying mass percentages of 5, 10, and 20% into SBS copolymer composites. Biodegradation tests were conducted under industrial composting conditions (58 °C and 50% relative humidity) for 180 days. The biodegradability of materials was evaluated by measuring the CO2 produced in each vessel during the study period. Potential correlations between the amount of carbon dioxide released and the percentage of biomass added to the polymer matrix were examined. Structural and morphological changes were assessed using Fourier Transform infrared spectroscopy (FTIR), thermal analysis (DSC), and scanning electron microscopy (SEM). Physical and chemical testing revealed a decrease in sample density after the industrial composting test, along with noticeable changes in melt flow index (MFI). The observed physical and chemical changes, coupled with FTIR, SEM, and DSC data, indicate increased cross-linking and higher porosity in biodegraded polymer structures with higher biomass content. This behavior is likely due to the formation of cross-linked connections between polymer chains and polypeptide chains resulting from protein degradation, enhancing connections between polystyrene units facilitated by peptide bonds with the benzene units of the styrene blocks within the polymer matrix.

Schlagwörter

Stichwörter der Autor:innen

Chlorella vulgarisSBS (styrene butadiene styrene)biodegradationmicroalgae biomasspolymer blends

Autor:innen und Institutionen

  • Faculty of Science and Arts, Valahia University of Targoviste, 13 Aleea Sinaia, 130004 Targoviste, Dambovita, Romania.
  • Institute of Multidisciplinary Research for Science and Technology, Valahia University of Targoviste, 13 Aleea Sinaia, 130004 Targoviste, Dambovita, Romania.
  • National Institute for Electrical Engineering, Advanced Research (INCDIE ICPE CA), 313 Splaiul Unirii, 030138 Bucharest, Romania.
  • National Research and Development Institute for Industrial Ecology-ECOIND, 57-73 Drumul Podu Dambovitei, District 6, 060652 Bucharest, Romania.
  • IMT Bucharest, National Institute for Research and Development in Microtechnologies, 126A Erou Iancu Nicolae, 077190 Voluntari, Romania.

ORCID-Profile: Marius Bumbac, Cristina Mihaela Nicolescu, Traian Zaharescu, Costel Bumbac, Octavian Buiu

Förderung

  • EEA and Norway Grants
  • Romanian Ministry of Research, Innovation and Digitization
  • Excellence and Performance to Increase the RDI Institutional Capacity (Pro Excellence)

Zitieren

APA

Bumbac, M., Nicolescu, C. M., Zaharescu, T., Bumbac, C., Manea, E. E., Ionescu, I. A., Gurgu, I. V., Serban, B. C., Buiu, O., & Dumitrescu, C. (2024). Influence of Biogenic Material Content on the Biodegradability of Styrene-Butadiene Composites with Incorporated Chlorella vulgaris Biomass. Polymers, 16(9), 1241. https://doi.org/10.3390/polym16091241

Vancouver

Bumbac M, Nicolescu CM, Zaharescu T, Bumbac C, Manea EE, Ionescu IA, et al. Influence of Biogenic Material Content on the Biodegradability of Styrene-Butadiene Composites with Incorporated Chlorella vulgaris Biomass. Polymers. 2024;16(9):1241. doi:10.3390/polym16091241

BibTeX
@article{Bumbac2024,
  author = {Bumbac, Marius and Nicolescu, Cristina Mihaela and Zaharescu, Traian and Bumbac, Costel and Manea, Elena Elisabeta and Ionescu, Ioana Alexandra and Gurgu, Ion Valentin and Serban, Bogdan-Catalin and Buiu, Octavian and Dumitrescu, Crinela},
  title = {Influence of Biogenic Material Content on the Biodegradability of Styrene-Butadiene Composites with Incorporated Chlorella vulgaris Biomass},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {9},
  pages = {1241},
  doi = {10.3390/polym16091241}
}
Kostenlos starten →