Tribological Performance and Enhancing Mechanism of 3D Printed PEEK Coated with In Situ ZIF-8 Nanomaterial
Polymers · 19.04.2024 · 16 (8) · 1150
DOI: 10.3390/polym16081150 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 19.04.2024. Verfasst von Xinchao Wang und 7 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical & Electrical Engineering, and Henan Provincial Engineering Research Centre of Automotive Composite Materials, Henan University o…. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Henan University of Technology, Natural Science Foundation of Henan Provincial Education Department, the National Natural Science Foundation of China, the Henan Outstanding Youth Fund.
Abstract (Originalsprache)
Polyether ether ketone (PEEK) is esteemed as a high-performance engineering polymer renowned for its exceptional mechanical properties and thermal stability. Nonetheless, the majority of polymer-based lubricating materials fail to meet the contemporary industrial demands for motion components regarding high speed, heavy loading, temperature resistance, and precise control. Utilizing 3D printing technology to design and fabricate intricately structured components, developing high-performance polymer self-lubricating materials becomes imperative to fulfill the stringent operational requirements of motion mechanisms. This study introduces a novel approach employing 3D printing technology to produce PEEK with varying filling densities and conducting in situ synthesis of zeolitic imidazolate framework (ZIF-8) nanomaterials on its surface to enhance PEEK’s frictional performance. The research discusses the synthetic methodology, characterization techniques, and tribological performance evaluation of in situ synthesized ZIF-8 nanomaterials on PEEK surfaces. The findings demonstrate a significant enhancement in frictional performance of the composite material under low-load conditions, achieving a minimum wear rate of 4.68 × 10−6 mm3/N·m compared to the non-grafted PEEK material’s wear rate of 1.091 × 10−5 mm3/N·m, an approximately 1.3 times improvement. Detailed characterization and analysis of the worn surface of the steel ring unveil the lubrication mechanism of the ZIF-8 nanoparticles, thereby presenting new prospects for the diversified applications of PEEK.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Mechanical & Electrical Engineering, and Henan Provincial Engineering Research Centre of Automotive Composite Materials, Henan University of Technology, Zhengzhou 450001, China.
Förderung
- Henan University of Technology, Natural Science Foundation of Henan Provincial Education Department
- the National Natural Science Foundation of China
- the Henan Outstanding Youth Fund
Zitieren
APA
Wang, X., Hu, J., Liu, J., Liang, Y., Wu, L., Geng, T., Liu, S., & Guo, Y. (2024). Tribological Performance and Enhancing Mechanism of 3D Printed PEEK Coated with In Situ ZIF-8 Nanomaterial. Polymers, 16(8), 1150. https://doi.org/10.3390/polym16081150
Vancouver
Wang X, Hu J, Liu J, Liang Y, Wu L, Geng T, et al. Tribological Performance and Enhancing Mechanism of 3D Printed PEEK Coated with In Situ ZIF-8 Nanomaterial. Polymers. 2024;16(8):1150. doi:10.3390/polym16081150
BibTeX
@article{Wang2024,
author = {Wang, Xinchao and Hu, Jiale and Liu, Jiajia and Liang, Yixin and Wu, Lan and Geng, Tie and Liu, Shihua and Guo, Yonggang},
title = {Tribological Performance and Enhancing Mechanism of 3D Printed PEEK Coated with In Situ ZIF-8 Nanomaterial},
journal = {Polymers},
year = {2024},
volume = {16},
number = {8},
pages = {1150},
doi = {10.3390/polym16081150}
}
EUVIMED