EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Evaluation of the Viability of 3D Printing in Recycling Polymers

Chrysanthos Maraveas iD, Ioannis Vasileios Kyrtopoulos iD, Konstantinos G Arvanitis iD

Polymers · 16.04.2024 · 16 (8) · 1104

DOI: 10.3390/polym16081104 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Polymers, online erschienen am 16.04.2024. Verfasst von Chrysanthos Maraveas und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Natural Resources Development and Agricultural Engineering, Agricultural University of Athens, 75 Iera Odos Street, 11855 Athens, Greec…. Die Arbeit wurde bisher 37-mal zitiert (Crossref) und nennt 118 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The increased use of plastics in industrial and agricultural applications has led to high levels of pollution worldwide and is a significant challenge. To address this plastic pollution, conventional methods such as landfills and incineration are used, leading to further challenges such as the generation of greenhouse gas emissions. Therefore, increasing interest has been directed to identifying alternative methods to dispose of plastic waste from agriculture. The novelty of the current research arose from the lack of critical reviews on how 3-Dimensional (3D) printing was adopted for recycling plastics, its application in the production of agricultural plastics, and its specific benefits, disadvantages, and limitations in recycling plastics. The review paper offers novel insights regarding the application of 3D printing methods including Fused Particle Fabrication (FPF), Hot Melt Extrusion (HME), and Fused Deposition Modelling (FDM) to make filaments from plastics. However, the methods were adopted in local recycling setups where only small quantities of the raw materials were considered. Data was collected using a systematic review involving 39 studies. Findings showed that the application of the 3D printing methods led to the generation of agricultural plastics such as Polylactic Acid (PLA), Acrylonitrile Butadiene Styrene (ABS), Polyethylene Terephthalate (PET), and High-Density Polyethylene (HDPE), which were found to have properties comparable to those of virgin plastic, suggesting the viability of 3D printing in managing plastic pollution. However, limitations were also associated with the 3D printing methods; 3D-printed plastics deteriorated rapidly under Ultraviolet (UV) light and are non-biodegradable, posing further risks of plastic pollution. However, UV stabilization helps reduce plastic deterioration, thus increasing longevity and reducing disposal. Future directions emphasize identifying methods to reduce the deterioration of 3D-printed agricultural plastics and increasing their longevity in addition to UV stability.

Schlagwörter

Stichwörter der Autor:innen

3D printingdegradationfilamentsphotolysispolymersrecyclingwaste

Autor:innen und Institutionen

  • Department of Natural Resources Development and Agricultural Engineering, Agricultural University of Athens, 75 Iera Odos Street, 11855 Athens, Greece.

ORCID-Profile: Chrysanthos Maraveas, Ioannis Vasileios Kyrtopoulos, Konstantinos G Arvanitis

Zitieren

APA

Maraveas, C., Kyrtopoulos, I. V., & Arvanitis, K. G. (2024). Evaluation of the Viability of 3D Printing in Recycling Polymers. Polymers, 16(8), 1104. https://doi.org/10.3390/polym16081104

Vancouver

Maraveas C, Kyrtopoulos IV, Arvanitis KG. Evaluation of the Viability of 3D Printing in Recycling Polymers. Polymers. 2024;16(8):1104. doi:10.3390/polym16081104

BibTeX
@article{Maraveas2024,
  author = {Maraveas, Chrysanthos and Kyrtopoulos, Ioannis Vasileios and Arvanitis, Konstantinos G},
  title = {Evaluation of the Viability of 3D Printing in Recycling Polymers},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {8},
  pages = {1104},
  doi = {10.3390/polym16081104}
}
Kostenlos starten →