EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Optimisation of 3D Printing for Microcellular Polymers

Christian Andrew Griffiths iD, Andrew Rees iD, Adam Morgan iD, Feras Korkees

Polymers · 27.09.2023 · 15 (19) · 3910

DOI: 10.3390/polym15193910 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 27.09.2023. Verfasst von Christian Andrew Griffiths und 3 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Science and Engineering, Swansea University, Swansea SA1 8EN, UK. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polymers are extensively used in various industries due to their versatility, durability and cost-effectiveness. To ensure functionality and longevity, polymer parts must have sufficient strength to endure external forces without deformation or breakage. Traditional approaches to increasing part strength involve adding more material; however, balancing strength to weight relationships is challenging. This paper explorers the viability of manufacturing lightweight components using a microcellular foaming polymer. Microcellular foaming has emerged as a helpful tool to achieve an optimal strength-to-weight ratio; offering advantages such as lightweight, improved mechanical properties, reduced material usage, better insulation and improved cost-effectiveness. It can also contribute to improved fuel efficiency and reduced carbon emissions, making them environmentally favourable. The combination of additive manufacturing (AM) and microcellular foaming has opened new possibilities for design innovation. This text highlights the challenges and efforts in incorporating foaming techniques into 3D printing processes, specifically fused filament fabrication (FFF). This study reveals that microcellular polymers are a viable option when balancing part strength and weight. The experiments completed during the formulation of this paper demonstrated that lightweight LW-PLA parts were significantly lighter than standard PLA parts and that a design of experiments approach can be used to optimise strength properties and provide insights into optimising manufacturability. Microcellular polymers present an opportunity for lighter and stronger 3D printed parts, offering potential energy and material savings for sustainable manufacturing practices.

Schlagwörter

Stichwörter der Autor:innen

3D printingadditive manufacturingfused deposition modellingfused filament fabricationlightweight PLA

Autor:innen und Institutionen

  • Faculty of Science and Engineering, Swansea University, Swansea SA1 8EN, UK.

ORCID-Profile: Christian Andrew Griffiths, Andrew Rees, Adam Morgan

Zitieren

APA

Griffiths, C. A., Rees, A., Morgan, A., & Korkees, F. (2023). Optimisation of 3D Printing for Microcellular Polymers. Polymers, 15(19), 3910. https://doi.org/10.3390/polym15193910

Vancouver

Griffiths CA, Rees A, Morgan A, Korkees F. Optimisation of 3D Printing for Microcellular Polymers. Polymers. 2023;15(19):3910. doi:10.3390/polym15193910

BibTeX
@article{Griffiths2023,
  author = {Griffiths, Christian Andrew and Rees, Andrew and Morgan, Adam and Korkees, Feras},
  title = {Optimisation of 3D Printing for Microcellular Polymers},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {19},
  pages = {3910},
  doi = {10.3390/polym15193910}
}
Kostenlos starten →