EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Enhancing Polyvinyl Alcohol Nanocomposites with Carboxy-Functionalized Graphene: An In-Depth Analysis of Mechanical, Barrier, Electrical, Antibacterial, and Chemical Properties

Yu-Jie Shui, Wei-Hua Yao, Jarrn-Horng Lin iD, Yingjun Zhang iD, Yongqi Yu, Chin-San Wu, Xuemei Zhang, Chi-Hui Tsou iD

Polymers · 11.04.2024 · 16 (8) · 1070

DOI: 10.3390/polym16081070 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 11.04.2024. Verfasst von Yu-Jie Shui und 7 weiteren Autor:innen. Beteiligte Einrichtung: Material Corrosion and Protection Key Laboratory of Sichuan Province, School of Materials Science and Engineering, Sichuan University of Science and …. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 90 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Science and Technology Department of Sichuan Province, Sichuan Province Science and Technology Support Program, Research and Innovation Team Program of Sichuan University of Science and Technology.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To enhance the various properties of polyvinyl alcohol (PVA), varying concentrations of carboxy-functionalized graphene (CFG) were employed in the preparation of CFG/PVA nanocomposite films. FTIR and XRD analyses revealed that CFG, in contrast to graphene, not only possesses carboxylic acid group but also exhibits higher crystallinity. Mechanical testing indicated a notable superiority of CFG addition over graphene, with optimal mechanical properties such as tensile and yield strengths being achieved at a 3% CFG concentration. Relative to pure PVA, the tensile strength and yield strength of the composite increased by 2.07 and 2.01 times, respectively. XRD analysis showed distinct changes in the crystalline structure of PVA with the addition of CFG, highlighting the influence of CFG on the composite structure. FTIR and XPS analyses confirmed the formation of ester bonds between CFG and PVA, enhancing the overall performance of the material. TGA results also demonstrated that the presence of CFG enhanced the thermal stability of CFG/PVA nanocomposite films. However, analyses using scanning electron microscopy and transmission electron microscopy revealed that a 3% concentration of CFG was uniformly dispersed, whereas a 6% concentration of CFG caused aggregation of the nanofiller, leading to a decrease in performance. The incorporation of CFG significantly enhanced the water vapor and oxygen barrier properties of PVA, with the best performance observed at a 3% CFG concentration. Beyond this concentration, barrier properties were diminished owing to CFG aggregation. The study further demonstrated an increase in electrical conductivity and hydrophobicity of the nanocomposites with the addition of CFG. Antibacterial tests against E. coli showed that CFG/PVA nanocomposites exhibited excellent antibacterial properties, especially at higher CFG concentrations. These findings indicate that CFG/PVA nanocomposites, with an optimized CFG concentration, have significant potential for applications requiring enhanced mechanical strength, barrier properties, and antibacterial capabilities.

Schlagwörter

Stichwörter der Autor:innen

antibacterialbarrier performancecarboxy-functionalized grapheneconductivityhydrophobicitynanocomposite filmspolyvinyl alcohol

Autor:innen und Institutionen

  • Material Corrosion and Protection Key Laboratory of Sichuan Province, School of Materials Science and Engineering, Sichuan University of Science and Engineering, Zigong 643000, China.
  • Department of Materials and Textiles, Asia Eastern University of Science and Technology, New Taipei City 220, Taiwan.
  • Department of Material Science, National University of Tainan, Tainan 70005, Taiwan.
  • Department of Applied Cosmetology, Kao Yuan University, Kaohsiung 82101, Taiwan.

ORCID-Profile: Jarrn-Horng Lin, Yingjun Zhang, Chi-Hui Tsou

Förderung

  • Science and Technology Department of Sichuan Province
  • Sichuan Province Science and Technology Support Program
  • Research and Innovation Team Program of Sichuan University of Science and Technology

Zitieren

APA

Shui, Y. J., Yao, W. H., Lin, J. H., Zhang, Y., Yu, Y., Wu, C. S., Zhang, X., & Tsou, C. H. (2024). Enhancing Polyvinyl Alcohol Nanocomposites with Carboxy-Functionalized Graphene: An In-Depth Analysis of Mechanical, Barrier, Electrical, Antibacterial, and Chemical Properties. Polymers, 16(8), 1070. https://doi.org/10.3390/polym16081070

Vancouver

Shui YJ, Yao WH, Lin JH, Zhang Y, Yu Y, Wu CS, et al. Enhancing Polyvinyl Alcohol Nanocomposites with Carboxy-Functionalized Graphene: An In-Depth Analysis of Mechanical, Barrier, Electrical, Antibacterial, and Chemical Properties. Polymers. 2024;16(8):1070. doi:10.3390/polym16081070

BibTeX
@article{Shui2024,
  author = {Shui, Yu-Jie and Yao, Wei-Hua and Lin, Jarrn-Horng and Zhang, Yingjun and Yu, Yongqi and Wu, Chin-San and Zhang, Xuemei and Tsou, Chi-Hui},
  title = {Enhancing Polyvinyl Alcohol Nanocomposites with Carboxy-Functionalized Graphene: An In-Depth Analysis of Mechanical, Barrier, Electrical, Antibacterial, and Chemical Properties},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {8},
  pages = {1070},
  doi = {10.3390/polym16081070}
}
Kostenlos starten →