Synthesis and Electrical Percolation of Highly Amorphous Polyvinyl Alcohol/Reduced Graphene Oxide Nanocomposite
Materials · 30.05.2023 · 16 (11) · 4060
DOI: 10.3390/ma16114060 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 30.05.2023. Verfasst von Renata Adami und 11 weiteren Autor:innen. Beteiligte Einrichtung: Department of Physics, University of Salerno, 84084 Fisciano, Italy. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union Horizon 2020, Farb funding University of Salerno, Academy of Finland.
Abstract (Originalsprache)
Polyvinyl alcohol is the most commercially water-soluble biodegradable polymer, and it is in use for a wide range of applications. It shows good compatibility with most inorganic/organic fillers, and enhanced composites may be prepared without the need to introduce coupling agents and interfacial modifiers. The patented high amorphous polyvinyl alcohol (HAVOH), commercialized with the trade name G-Polymer, can be easily dispersed in water and melt processed. HAVOH is particularly suitable for extrusion and can be used as a matrix to disperse nanocomposites with different properties. In this work, the optimization of the synthesis and characterization of HAVOH/reduced graphene oxide (rGO) nanocomposite obtained by the solution blending process of HAVOH and Graphene Oxide (GO) water solutions and ‘in situ’ reduction of GO is studied. The produced nanocomposite presents a low percolation threshold (~1.7 wt%) and high electrical conductivity (up to 11 S/m) due to the uniform dispersion in the polymer matrix as a result of the solution blending process and the good reduction level of GO. In consideration of HAVOH processability, the conductivity obtained by using rGO as filler, and the low percolation threshold, the nanocomposite presented here is a good candidate for the 3D printing of a conductive structure.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Physics, University of Salerno, 84084 Fisciano, Italy.
- Centre NANO_MATES, University of Salerno, 84084 Fisciano, Italy.
- Department of Information and Electrical Engineering and Applied Mathematics, University of Salerno, 84084 Fisciano, Italy.
- Narrando Srl, Via Arcangelo Rotunno 43, 84134 Salerno, Italy.
- Research Institute for Nuclear Problems Belarusian State University, 220030 Minsk, Belarus.
- Department of Physics and Mathematics, University of Eastern Finland, 80101 Joensuu, Finland.
ORCID-Profile: Renata Adami, Patrizia Lamberti, Nicole D'Avanzo, Maria Sarno, Polina Kuzhir, Paolo Ciambelli
Förderung
- European Union Horizon 2020
- Farb funding University of Salerno
- Academy of Finland
Zitieren
APA
Adami, R., Lamberti, P., Casa, M., D'Avanzo, N., Ponticorvo, E., Cirillo, C., Sarno, M., Bychanok, D., Kuzhir, P., Yu, C., Xia, H., & Ciambelli, P. (2023). Synthesis and Electrical Percolation of Highly Amorphous Polyvinyl Alcohol/Reduced Graphene Oxide Nanocomposite. Materials, 16(11), 4060. https://doi.org/10.3390/ma16114060
Vancouver
Adami R, Lamberti P, Casa M, D'Avanzo N, Ponticorvo E, Cirillo C, et al. Synthesis and Electrical Percolation of Highly Amorphous Polyvinyl Alcohol/Reduced Graphene Oxide Nanocomposite. Materials. 2023;16(11):4060. doi:10.3390/ma16114060
BibTeX
@article{Adami2023,
author = {Adami, Renata and Lamberti, Patrizia and Casa, Marcello and D'Avanzo, Nicole and Ponticorvo, Eleonora and Cirillo, Claudia and Sarno, Maria and Bychanok, Dzmitry and Kuzhir, Polina and Yu, Changjiang and Xia, Hesheng and Ciambelli, Paolo},
title = {Synthesis and Electrical Percolation of Highly Amorphous Polyvinyl Alcohol/Reduced Graphene Oxide Nanocomposite},
journal = {Materials},
year = {2023},
volume = {16},
number = {11},
pages = {4060},
doi = {10.3390/ma16114060}
}
EUVIMED