EUVIMEDOpdag EUVIMED
Open access · CC BY 4.0

Microbially Mediated Rubber Recycling to Facilitate the Valorization of Scrap Tires

Sk Faisal Kabir, Skanda Vishnu Sundar, Aide Robles, Evelyn M Miranda, Anca G Delgado iD, Elham H Fini iD

Polymers · 2024-04-08 · 16 (7) · 1017

DOI: 10.3390/polym16071017 ↗

At a glance

Journal article in Polymers, published online on 2024-04-08. Written by Sk Faisal Kabir and 5 co-authors. Institution: School of Sustainable Engineering and the Built Environment, Arizona State University, 660 S College Ave, Tempe, AZ 85281, USA. Cited 10 times so far (Crossref); 62 references. The full text is freely available (open access, CC BY 4.0). Funded by: National Science Foundation.

AbstractSubjectsBibliografiske oplysningerCiteRelated studies

Abstract (original language)

The recycling of scrap tire rubber requires high levels of energy, which poses challenges to its proper valorization. The application of rubber in construction requires significant mechanical and/or chemical treatment of scrap rubber to compatiblize it with the surrounding matrix. These methods are energy-consuming and costly and may lead to environmental concerns associated with chemical leachates. Furthermore, recent methods usually call for single-size rubber particles or a narrow rubber particle size distribution; this, in turn, adds to the pre-processing cost. Here, we used microbial etching (e.g., microbial metabolism) to modify the surface of rubber particles of varying sizes. Specifically, we subjected rubber particles with diameters of 1.18 mm and 0.6 mm to incubation in flask bioreactors containing a mineral medium with thiosulfate and acetate and inoculated them with a microbial culture from waste-activated sludge. The near-stoichiometric oxidation of thiosulfate to sulfate was observed in the bioreactors. Most notably, two of the most potent rubber-degrading bacteria (Gordonia and Nocardia) were found to be significantly enriched in the medium. In the absence of added thiosulfate in the medium, sulfate production, likely from the desulfurization of the rubber, was also observed. Microbial etching increased the surface polarity of rubber particles, enhancing their interactions with bitumen. This was evidenced by an 82% reduction in rubber–bitumen separation when 1.18 mm microbially etched rubber was used. The study outcomes provide supporting evidence for a rubber recycling method that is environmentally friendly and has a low cost, promoting pavement sustainability and resource conservation.

Subjects

Author keywords

bitumen compatibilitydesulfurizationlow-carbon economymicrobial mediationrubberized bitumensustainability

Authors and institutions

  • School of Sustainable Engineering and the Built Environment, Arizona State University, 660 S College Ave, Tempe, AZ 85281, USA.
  • Center for Research and Education in Advanced Transportation Engineering Systems (CREATEs), Rowan University, South Jersey Technology Park, 107 Gilbreth Parkway, Mullica Hill, NJ 08062, USA.
  • Biodesign Swette Center for Environmental Biotechnology, Arizona State University, 1001 S McAllister Ave, Tempe, AZ 85281, USA.
  • School for Engineering of Matter, Transport & Energy, Arizona State University, 501 E Tyler Mall, Tempe, AZ 85287, USA.

ORCID profiles: Anca G Delgado, Elham H Fini

Funding

  • National Science Foundation

Cite

APA

Kabir, S. F., Sundar, S. V., Robles, A., Miranda, E. M., Delgado, A. G., & Fini, E. H. (2024). Microbially Mediated Rubber Recycling to Facilitate the Valorization of Scrap Tires. Polymers, 16(7), 1017. https://doi.org/10.3390/polym16071017

Vancouver

Kabir SF, Sundar SV, Robles A, Miranda EM, Delgado AG, Fini EH. Microbially Mediated Rubber Recycling to Facilitate the Valorization of Scrap Tires. Polymers. 2024;16(7):1017. doi:10.3390/polym16071017

BibTeX
@article{Kabir2024,
  author = {Kabir, Sk Faisal and Sundar, Skanda Vishnu and Robles, Aide and Miranda, Evelyn M and Delgado, Anca G and Fini, Elham H},
  title = {Microbially Mediated Rubber Recycling to Facilitate the Valorization of Scrap Tires},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {7},
  pages = {1017},
  doi = {10.3390/polym16071017}
}
Start for free →