EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Linear Capacitive Pressure Sensor with Gradient Architecture through Laser Ablation on MWCNT/Ecoflex Film

Chenkai Jiang, Bin Sheng iD

Polymers · 02.04.2024 · 16 (7) · 962

DOI: 10.3390/polym16070962 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 02.04.2024. Verfasst von Chenkai Jiang und 1 weiteren Autor:innen. Beteiligte Einrichtung: School of Optical-Electrical and Computer Engineering, University of Shanghai for Science and Technology, Shanghai 200093, China. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 55 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the Natural Science Foundation of Shanghai, Shanghai municipal innovation and entrepreneurship training program for college students, the National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The practical application of flexible pressure sensors, including electronic skins, wearable devices, human–machine interaction, etc., has attracted widespread attention. However, the linear response range of pressure sensors remains an issue. Ecoflex, as a silicone rubber, is a common material for flexible pressure sensors. Herein, we have innovatively designed and fabricated a pressure sensor with a gradient micro-cone architecture generated by CO2 laser ablation of MWCNT/Ecoflex dielectric layer film. In cooperation with the gradient micro-cone architecture and a dielectric layer of MWCNT/Ecoflex with a variable high dielectric constant under pressure, the pressure sensor exhibits linearity (R2 = 0.990) within the pressure range of 0–60 kPa, boasting a sensitivity of 0.75 kPa−1. Secondly, the sensor exhibits a rapid response time of 95 ms, a recovery time of 129 ms, hysteresis of 6.6%, and stability over 500 cycles. Moreover, the sensor effectively exhibited comprehensive detection of physiological signals, airflow detection, and Morse code communication, thereby demonstrating the potential for various applications.

Schlagwörter

Stichwörter der Autor:innen

dielectric constantflexible capacitive pressure sensorgradient micro-cone architecturelaser ablationlinear responsesilicone rubber

Autor:innen und Institutionen

  • School of Optical-Electrical and Computer Engineering, University of Shanghai for Science and Technology, Shanghai 200093, China.
  • Shanghai Key Laboratory of Modern Optical Systems, Engineering Research Center of Optical Instruments and Systems, Shanghai 200093, China.

ORCID-Profile: Bin Sheng

Förderung

  • the Natural Science Foundation of Shanghai
  • Shanghai municipal innovation and entrepreneurship training program for college students
  • the National Natural Science Foundation of China
  • Natural Science Foundation of Shanghai
  • Shanghai Municipal Innovation and Entrepreneurship Training Program
  • National Natural Science Foundation of China

Zitieren

APA

Jiang, C., & Sheng, B. (2024). Linear Capacitive Pressure Sensor with Gradient Architecture through Laser Ablation on MWCNT/Ecoflex Film. Polymers, 16(7), 962. https://doi.org/10.3390/polym16070962

Vancouver

Jiang C, Sheng B. Linear Capacitive Pressure Sensor with Gradient Architecture through Laser Ablation on MWCNT/Ecoflex Film. Polymers. 2024;16(7):962. doi:10.3390/polym16070962

BibTeX
@article{Jiang2024,
  author = {Jiang, Chenkai and Sheng, Bin},
  title = {Linear Capacitive Pressure Sensor with Gradient Architecture through Laser Ablation on MWCNT/Ecoflex Film},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {7},
  pages = {962},
  doi = {10.3390/polym16070962}
}
Kostenlos starten →