Beetle‐Inspired Gradient Slant Structures for Capacitive Pressure Sensor with a Broad Linear Response Range
Advanced Functional Materials · 2024-06 · 34 (26)
DOI: 10.1002/adfm.202312370 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 08.02.2024. Verfasst von Lei Wu und 6 weiteren Autor:innen. Die Arbeit wurde bisher 145-mal zitiert (Crossref) und nennt 49 Literaturangaben. Gefördert von: National Research Foundation of Korea, Korea Evaluation Institute of Industrial Technology, National Natural Science Foundation of China.
Abstract (Originalsprache)
Flexible pressure sensors with broad linearity range and excellent sensor‐to‐sensor uniformity have attracted unprecedented attention in the electronic skins, human–machine interfaces, and environmental monitoring. However, challenges including poor sensor‐to‐sensor uniformity owing to the randomness of the used nanomaterials or porous structures and saturated response that leads to a restricted linearity range because of structural stiffening have been yet addressed. Herein, a novel dielectric layer based on beetle‐inspired gradient slant structures (GSS) is proposed to endow capacitive pressure sensors with extensive linearity range and excellent sensor‐to‐sensor uniformity. The excellent compressibility of the GSS due to the bending deformation of the slant pillars significantly enhances sensor sensitivity. The broad linearity range comes from the compensation of contact area during sequential contact of the GSS dielectric layer from tall to low slant pillars with electrodes. The high sensor‐to‐sensor uniformity is ascribed to the excellent batch‐to‐batch consistency of prepared GSS via 3D printing‐based fabrication process. Moreover, the proposed GSS‐based pressure sensors present rapid response/recovery, low detection limit, excellent dynamic response, negligible hysteresis, and outstanding long‐term stability. Finally, the excellent applicabilities of proposed capacitive pressure sensors in diverse scenarios including external pressure stimuli detection, a flexible perception array, and a smart insole system are demonstrated.
Förderung
- National Research Foundation of Korea
- Korea Evaluation Institute of Industrial Technology
- National Natural Science Foundation of China
Zitieren
APA
Wu, L., Li, X., Choi, J., Zhao, Z., Qian, L., Yu, B., & Park, I. (2024). Beetle‐Inspired Gradient Slant Structures for Capacitive Pressure Sensor with a Broad Linear Response Range. Advanced Functional Materials, 34(26). https://doi.org/10.1002/adfm.202312370
Vancouver
Wu L, Li X, Choi J, Zhao Z, Qian L, Yu B, et al. Beetle‐Inspired Gradient Slant Structures for Capacitive Pressure Sensor with a Broad Linear Response Range. Advanced Functional Materials. 2024;34(26). doi:10.1002/adfm.202312370
BibTeX
@article{Wu2024,
author = {Wu, Lei and Li, Xuan and Choi, Jungrak and Zhao, Zhi‐Jun and Qian, Linmao and Yu, Bingjun and Park, Inkyu},
title = {Beetle‐Inspired Gradient Slant Structures for Capacitive Pressure Sensor with a Broad Linear Response Range},
journal = {Advanced Functional Materials},
year = {2024},
volume = {34},
number = {26},
doi = {10.1002/adfm.202312370}
}
EUVIMED