Development of a Polypropylene-Based Material with Flame-Retardant Properties for 3D Printing
Polymers · 21.03.2024 · 16 (6) · 858
DOI: 10.3390/polym16060858 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 21.03.2024. Verfasst von Eleonora Lorenzi und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Applied Science and Technology, Politecnico di Torino, Viale Teresa Michel 5, 15121 Alessandria, Italy. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
In this study, a nanocomposite based on a heterophasic polypropylene copolymer containing 5 wt% of nanoclays and 3 wt% of compatibilizer was formulated via melt compounding to obtain a material suitable for Fused Filament Fabrication (FFF) processing with enhanced flame-retardant properties. From rheological analyses, the nanocomposite showed an important increase in the non-Newtonian behavior, and, therefore, improved FFF printability compared to the pristine PP COPO. A filament with suitable characteristics for FFF was produced using a single-screw extruder and subsequently 3D printed. Finally, cone calorimeter and UL94 tests were carried out on both 3D-printed and compression-molded specimens. The obtained results showed that the 3D-printed samples exhibited even better flame-retardant properties than the compression-molded ones, thus demonstrating not only the possibility of successfully developing and using functionalized PP-based filaments in 3D printing but also the possibility of obtaining enhanced flame-retardant properties compared to conventional compression molding.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Applied Science and Technology, Politecnico di Torino, Viale Teresa Michel 5, 15121 Alessandria, Italy.
- Local INSTM Unit, 15121 Alessandria, Italy.
ORCID-Profile: Rossella Arrigo, Alberto Frache
Zitieren
APA
Lorenzi, E., Arrigo, R., & Frache, A. (2024). Development of a Polypropylene-Based Material with Flame-Retardant Properties for 3D Printing. Polymers, 16(6), 858. https://doi.org/10.3390/polym16060858
Vancouver
Lorenzi E, Arrigo R, Frache A. Development of a Polypropylene-Based Material with Flame-Retardant Properties for 3D Printing. Polymers. 2024;16(6):858. doi:10.3390/polym16060858
BibTeX
@article{Lorenzi2024,
author = {Lorenzi, Eleonora and Arrigo, Rossella and Frache, Alberto},
title = {Development of a Polypropylene-Based Material with Flame-Retardant Properties for 3D Printing},
journal = {Polymers},
year = {2024},
volume = {16},
number = {6},
pages = {858},
doi = {10.3390/polym16060858}
}
EUVIMED