EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Various FDM Mechanisms Used in the Fabrication of Continuous-Fiber Reinforced Composites: A Review

Armin Karimi iD, Davood Rahmatabadi iD, Mostafa Baghani iD

Polymers · 18.03.2024 · 16 (6) · 831

DOI: 10.3390/polym16060831 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Polymers, online erschienen am 18.03.2024. Verfasst von Armin Karimi und 2 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, College of Engineering, University of Tehran, Tehran 1417614411, Iran. Die Arbeit wurde bisher 199-mal zitiert (Crossref) und nennt 130 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Fused Deposition Modeling (FDM) is an additive manufacturing technology that has emerged as a promising technique for fabricating 3D printed polymers. It has gained attention recently due to its ease of use, efficiency, low cost, and safety. However, 3D-printed FDM components lack sufficient strength compared to those made using conventional manufacturing methods. This low strength can be mainly attributed to high porosity and low sinterability of layers and then to the characteristics of the polymer used in the FDM process or the FDM process itself. Regarding polymer characteristics, there are two main types of reinforcing fibers: discontinuous (short) and continuous. Continuous-fiber reinforced composites are becoming popular in various industries due to their excellent mechanical properties. Since continuous reinforcing fibers have a more positive effect on increasing the strength of printed parts, this article focuses primarily on continuous long fibers. In addition to polymer characteristics, different mechanisms have been developed and introduced to address the issue of insufficient strength in 3D-printed FDM parts. This article comprehensively explains two main FDM mechanisms: in-situ fusion and ex-situ prepreg. It also provides relevant examples of these mechanisms using different reinforcing elements. Additionally, some other less frequently utilized mechanisms are discussed. Each mechanism has its own advantages and disadvantages, indicating that further development and modification are needed to increase the strength of 3D-printed FDM parts to be comparable to those produced using traditional methods.

Schlagwörter

Stichwörter der Autor:innen

Fused Depositing Modeling (FDM)additive manufacturingdiscontinuous and continuous fibersex-situ prepregin-situ fusionmechanismsreinforcing fibers

Autor:innen und Institutionen

  • School of Mechanical Engineering, College of Engineering, University of Tehran, Tehran 1417614411, Iran.
  • Department of Aerospace Engineering, Sharif University of Technology, Tehran 1411713114, Iran.

ORCID-Profile: Armin Karimi, Davood Rahmatabadi, Mostafa Baghani

Zitieren

APA

Karimi, A., Rahmatabadi, D., & Baghani, M. (2024). Various FDM Mechanisms Used in the Fabrication of Continuous-Fiber Reinforced Composites: A Review. Polymers, 16(6), 831. https://doi.org/10.3390/polym16060831

Vancouver

Karimi A, Rahmatabadi D, Baghani M. Various FDM Mechanisms Used in the Fabrication of Continuous-Fiber Reinforced Composites: A Review. Polymers. 2024;16(6):831. doi:10.3390/polym16060831

BibTeX
@article{Karimi2024,
  author = {Karimi, Armin and Rahmatabadi, Davood and Baghani, Mostafa},
  title = {Various FDM Mechanisms Used in the Fabrication of Continuous-Fiber Reinforced Composites: A Review},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {6},
  pages = {831},
  doi = {10.3390/polym16060831}
}
Kostenlos starten →