EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Development and Characterization of Bio-Based Formaldehyde Free Sucrose-Based Adhesive for Fabrication of Plywood

Longjiang Liu, Yongbo Jia, Lulu Zheng, Rui Luo, Hisham Essawy iD, Heming Huang, Yaming Wang, Shuduan Deng, Jun Zhang iD

Polymers · 27.02.2024 · 16 (5) · 640

DOI: 10.3390/polym16050640 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 27.02.2024. Verfasst von Longjiang Liu und 8 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Chemical Engineering, Kunming University of Science and Technology, Kunming 650093, China. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Yunnan Provincial Natural Science Foundatio, Yunnan Agricultural joint project, Yunnan Provincial Youth top talent project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In order to solve the problem of excessive consumption of petrochemical resources and the harm of free formaldehyde release to human health, biomass raw materials, such as sucrose (S) and ammonium dihydrogen phosphate (ADP) can be chemically condensed in a simple route under acidic conditions to produce a formaldehyde free wood adhesive (S-ADP), characterized by good storage stability and water resistance, and higher wet shear strength with respect to petroleum based phenolic resin adhesive. The dry and boiling shear strength of the plywood based on S-ADP adhesive are as high as 1.05 MPa and 1.19 MPa, respectively. Moreover, is Modulus of Elasticity (MOE) is as high as 4910 MPa. Interestingly, the plywood based on the developed S-ADP adhesive exhibited good flame retardancy. After burning for 90 s, its shape remains unchanged. Meanwhile, it can be concluded from thermomechanical analysis (TMA) and thermogravimetric analysis (TGA) that the S-ADP acquired excellent modulus of elasticity (MOE) and good thermal stability. It is thus thought promisingly that the use of S-ADP adhesive as a substitute for PF resin adhesive seems feasible in the near future.

Schlagwörter

Stichwörter der Autor:innen

ammonium dihydrogen phosphateesterification reactionflame retardancysucrose

Autor:innen und Institutionen

  • Faculty of Chemical Engineering, Kunming University of Science and Technology, Kunming 650093, China.
  • School of Chemical Engineering, Yunnan Vocational College of National-Defense Technology, Yunnan Open University, Kunming 650223, China.
  • Yunnan Provincial Key Laboratory of Wood Adhesives and Glued Products, Southwest Forestry University, Kunming 650224, China.
  • Department of Polymers and Pigments, National Research Centre, Dokki, Cairo 12622, Egypt.
  • Kunming Xinfeilin Wood-Based Panel Group Co., Ltd., Kunming 650106, China.

ORCID-Profile: Hisham Essawy, Jun Zhang

Förderung

  • Yunnan Provincial Natural Science Foundatio
  • Yunnan Agricultural joint project
  • Yunnan Provincial Youth top talent project
  • Yunnan Provincial Department of Education Science Research Foundation
  • Foreign Expert Workstation
  • 111 project
  • Yunnan Province Natural Science Key Foundation

Zitieren

APA

Liu, L., Jia, Y., Zheng, L., Luo, R., Essawy, H., Huang, H., Wang, Y., Deng, S., & Zhang, J. (2024). Development and Characterization of Bio-Based Formaldehyde Free Sucrose-Based Adhesive for Fabrication of Plywood. Polymers, 16(5), 640. https://doi.org/10.3390/polym16050640

Vancouver

Liu L, Jia Y, Zheng L, Luo R, Essawy H, Huang H, et al. Development and Characterization of Bio-Based Formaldehyde Free Sucrose-Based Adhesive for Fabrication of Plywood. Polymers. 2024;16(5):640. doi:10.3390/polym16050640

BibTeX
@article{Liu2024,
  author = {Liu, Longjiang and Jia, Yongbo and Zheng, Lulu and Luo, Rui and Essawy, Hisham and Huang, Heming and Wang, Yaming and Deng, Shuduan and Zhang, Jun},
  title = {Development and Characterization of Bio-Based Formaldehyde Free Sucrose-Based Adhesive for Fabrication of Plywood},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {5},
  pages = {640},
  doi = {10.3390/polym16050640}
}
Kostenlos starten →