A lab-scale prototype development of Lignin-Formaldehyde (LF) resin: A bio-renewable adhesive for wood panel industries
PLOS One · 08.07.2026 · 21 (7) · e0352893
DOI: 10.1371/journal.pone.0352893 ↗Kurz gefasst
Fachartikel in der Zeitschrift PLOS One, online erschienen am 08.07.2026. Verfasst von Arsalan Yousafzai und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Forestry and Wildlife Management, The University of Haripur, Haripur, Khyber Pakhtunkhwa, Pakistan. Hauptthemen laut MEDLINE: Lignin, Formaldehyde, Wood, Adhesives. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This study evaluated laboratory-prepared wood adhesives synthesized from alkaline lignins isolated from three locally available biomasses: chir pine needles (CP), eucalyptus sawdust (ESD), and sugarcane bagasse (SB). After alkaline extraction, each lignin was reacted with formaldehyde under alkaline conditions to synthesize resol-type lignin-formaldehyde resins under a complete phenol-replacement system. The Lignins differed in molecular weight, extraction yield, and hydroxyl distribution. Quantitative 31 P NMR showed total OH + COOH contents of 3.70 mmol g -1 for CP, 4.60 mmol g -1 for ESD, and 4.83 mmol g -1 for SB. Thermogravimetric analysis indicated comparable thermal stability among the lignins, with char yields of 19.22–24.23% at 1000°C. The lignin formaldehyde (LF) resin showed alkaline pH, workable solid content, 3–4shear-thinning viscosity, and gel times suitable for laboratory hot pressing. Differential scanning calorimetry confirmed curing in the hot-pressing temperature range, with CP resin showing the highest glass transition temperature. In lap-shear testing, the laboratory phenol formaldehyde (PF) control showed the highest dry and wet strengths, while CP performed best among the LF resins, followed by ESD and SB. The results show that adhesive performance was not governed by total hydroxyl content alone. Instead, feedstock-dependent lignin structure, hydroxyl distribution, molecular size, and cured-network development jointly influenced bond strength and moisture resistance. The study supports the laboratory-scale potential of Pakistani biomass residues for lower-phenol wood adhesive development, while further work is needed on residual carbohydrates, panel formaldehyde emissions, commercial PF benchmarking, and scale-up feasibility.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Substanzen
Autor:innen und Institutionen
- Department of Forestry and Wildlife Management, The University of Haripur, Haripur, Khyber Pakhtunkhwa, Pakistan.
- Department of Biochemistry, Bahria University of Health Sciences, Karachi, Pakistan.
- Department of Chemistry, The University of Haripur, Haripur, Khyber Pakhtunkhwa, Pakistan.
- College of Material Engineering, Fujian Agriculture and Forestry University, Fuzhou, China.
ORCID-Profile: Majid Hussain
Zitieren
APA
Yousafzai, A., Rahman, T., Ahmad, S., Iqbal, M., Farooq, A., & Hussain, M. (2026). A lab-scale prototype development of Lignin-Formaldehyde (LF) resin: A bio-renewable adhesive for wood panel industries. PLOS One, 21(7), e0352893. https://doi.org/10.1371/journal.pone.0352893
Vancouver
Yousafzai A, Rahman T, Ahmad S, Iqbal M, Farooq A, Hussain M. A lab-scale prototype development of Lignin-Formaldehyde (LF) resin: A bio-renewable adhesive for wood panel industries. PLOS One. 2026;21(7):e0352893. doi:10.1371/journal.pone.0352893
BibTeX
@article{Yousafzai2026,
author = {Yousafzai, Arsalan and Rahman, Tufail and Ahmad, Sana and Iqbal, Muzaffar and Farooq, Ambar and Hussain, Majid},
title = {A lab-scale prototype development of Lignin-Formaldehyde (LF) resin: A bio-renewable adhesive for wood panel industries},
journal = {PLOS One},
year = {2026},
volume = {21},
number = {7},
pages = {e0352893},
doi = {10.1371/journal.pone.0352893}
}
EUVIMED