EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Kraft (Nano)Lignin as Reactive Additive in Epoxy Polymer Bio-Composites

Christina P Pappa iD, Simone Cailotto, Matteo Gigli, Claudia Crestini iD, Konstantinos S Triantafyllidis iD

Polymers · 18.02.2024 · 16 (4) · 553

DOI: 10.3390/polym16040553 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 18.02.2024. Verfasst von Christina P Pappa und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemistry, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece. Die Arbeit wurde bisher 28-mal zitiert (Crossref) und nennt 125 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Hellenic Foundation for Research and Innovation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The demand for high-performance bio-based materials towards achieving more sustainable manufacturing and circular economy models is growing significantly. Kraft lignin (KL) is an abundant and highly functional aromatic/phenolic biopolymer, being the main side product of the pulp and paper industry, as well as of the more recent 2nd generation biorefineries. In this study, KL was incorporated into a glassy epoxy system based on the diglycidyl ether of bisphenol A (DGEBA) and an amine curing agent (Jeffamine D-230), being utilized as partial replacement of the curing agent and the DGEBA prepolymer or as a reactive additive. A D-230 replacement by pristine (unmodified) KL of up to 14 wt.% was achieved while KL–epoxy composites with up to 30 wt.% KL exhibited similar thermo-mechanical properties and substantially enhanced antioxidant properties compared to the neat epoxy polymer. Additionally, the effect of the KL particle size was investigated. Ball-milled kraft lignin (BMKL, 10 μm) and nano-lignin (NLH, 220 nm) were, respectively, obtained after ball milling and ultrasonication and were studied as additives in the same epoxy system. Significantly improved dispersion and thermo-mechanical properties were obtained, mainly with nano-lignin, which exhibited fully transparent lignin–epoxy composites with higher tensile strength, storage modulus and glass transition temperature, even at 30 wt.% loadings. Lastly, KL lignin was glycidylized (GKL) and utilized as a bio-based epoxy prepolymer, achieving up to 38 wt.% replacement of fossil-based DGEBA. The GKL composites exhibited improved thermo-mechanical properties and transparency. All lignins were extensively characterized using NMR, TGA, GPC, and DLS techniques to correlate and justify the epoxy polymer characterization results.

Schlagwörter

Stichwörter der Autor:innen

bio-compositesepoxy resinskraft ligninlignin–epoxy compositesnanolignin

Autor:innen und Institutionen

  • Department of Chemistry, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece.
  • Department of Molecular Sciences and Nanosystems, Ca' Foscari University of Venice, 30170 Venice Mestre, Italy.
  • Center for Interdisciplinary Research and Innovation (CIRI-AUTH), 57001 Thessaloniki, Greece.

ORCID-Profile: Christina P Pappa, Claudia Crestini, Konstantinos S Triantafyllidis

Förderung

  • Hellenic Foundation for Research and Innovation

Zitieren

APA

Pappa, C. P., Cailotto, S., Gigli, M., Crestini, C., & Triantafyllidis, K. S. (2024). Kraft (Nano)Lignin as Reactive Additive in Epoxy Polymer Bio-Composites. Polymers, 16(4), 553. https://doi.org/10.3390/polym16040553

Vancouver

Pappa CP, Cailotto S, Gigli M, Crestini C, Triantafyllidis KS. Kraft (Nano)Lignin as Reactive Additive in Epoxy Polymer Bio-Composites. Polymers. 2024;16(4):553. doi:10.3390/polym16040553

BibTeX
@article{Pappa2024,
  author = {Pappa, Christina P and Cailotto, Simone and Gigli, Matteo and Crestini, Claudia and Triantafyllidis, Konstantinos S},
  title = {Kraft (Nano)Lignin as Reactive Additive in Epoxy Polymer Bio-Composites},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {4},
  pages = {553},
  doi = {10.3390/polym16040553}
}
Kostenlos starten →