Fractionated and Methacrylated Kraft Lignin as a Reactive Macromonomer for Multifunctional, Partially Bio-Based PMMA Copolymers
Industrial & Engineering Chemistry Research · 07.11.2026
DOI: 10.1021/acs.iecr.6c04285 ↗Kurz gefasst
Fachartikel in der Zeitschrift Industrial & Engineering Chemistry Research, online erschienen am 07.11.2026. Verfasst von Ismail Khan und 3 weiteren Autor:innen. Die Arbeit nennt 86 Literaturangaben. Gefördert von: Natural Sciences and Engineering Research Council of Canada, Alberta Innovates.
Abstract (Originalsprache)
Developing sustainable polymeric materials requires effective use of renewable aromatic feedstocks. Lignin is a promising biobased candidate, but its structural heterogeneity and broad molecular-weight distribution limit its direct use in polymer synthesis. Herein, solvent fractionation was used to isolate a low-molecular-weight softwood kraft lignin fraction that was then methacrylated and copolymerized with methyl methacrylate (MMA) by microwave-assisted free-radical polymerization. A Box–Behnken design was used to optimize copolymer molecular weight by varying azobis(isobutyronitrile) (AIBN) loading, temperature, and reaction time. Under optimum conditions (8 mg of AIBN, 70 °C, 60 min), the copolymer with Mw = 2.09 × 105 g/mol was obtained. Methacrylated lignin (ML) feeds of 0–30 wt % were evaluated, with maximum tensile strength obtained at 20 wt % ML feed (68.0 MPa). At 30 wt % ML feed, radical-scavenging activity (RSA) reached approximately 67% at 33.33 mg/mL, compared with approximately 17% for neat poly(methyl methacrylate) (PMMA). After two dissolution–recasting cycles, the lignin-containing copolymer films retained 75–80% of their initial tensile strength. This method demonstrates that lignin fractionation and methacrylation offer a potential approach to creating multifunctional, partially biobased PMMA copolymers with tunable mechanical properties, enhanced antioxidant activity, and good solution processability.
Förderung
- Natural Sciences and Engineering Research Council of Canada
- Alberta Innovates
Zitieren
APA
Khan, I., Camas, K. L., Ayranci, C., & Ullah, A. (2026). Fractionated and Methacrylated Kraft Lignin as a Reactive Macromonomer for Multifunctional, Partially Bio-Based PMMA Copolymers. Industrial & Engineering Chemistry Research. https://doi.org/10.1021/acs.iecr.6c04285
Vancouver
Khan I, Camas KL, Ayranci C, Ullah A. Fractionated and Methacrylated Kraft Lignin as a Reactive Macromonomer for Multifunctional, Partially Bio-Based PMMA Copolymers. Industrial & Engineering Chemistry Research. 2026. doi:10.1021/acs.iecr.6c04285
BibTeX
@article{Khan2026,
author = {Khan, Ismail and Camas, Karen Lopez and Ayranci, Cagri and Ullah, Aman},
title = {Fractionated and Methacrylated Kraft Lignin as a Reactive Macromonomer for Multifunctional, Partially Bio-Based PMMA Copolymers},
journal = {Industrial & Engineering Chemistry Research},
year = {2026},
doi = {10.1021/acs.iecr.6c04285}
}
EUVIMED