Degradation of Mechanical Properties of Flax/PLA Composites in Hygrothermal Aging Conditions
Polymers · 15.02.2024 · 16 (4) · 528
DOI: 10.3390/polym16040528 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 15.02.2024. Verfasst von Liujiao Wang und 3 weiteren Autor:innen. Beteiligte Einrichtung: Continuum Mechanics and Structural Analysis Department, Carlos III University of Madrid, Av. Universidad, 30, 28911 Leganes, Spain. Die Arbeit wurde bisher 37-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministerio de Ciencia e Innovación, FEDER, Spain.
Abstract (Originalsprache)
The main advantage of green composites is their biodegradability, but this biodegradability can also be considered a drawback if the degradation appears during the service life of the component. Therefore, the study of the mechanical behavior of green composites after hygrothermal aging tests is necessary to analyze their degradation process. This study aims to comprehensively analyze the hygrothermal aging behavior and aging mechanism of flax-fiber-reinforced polylactic acid (PLA) biocomposites. The fully biodegradable composites are manufactured by compression molding. In addition, the influence of atmospheric-pressure plasma treatment on the mechanical properties of the biocomposite is studied. Specimens are exposed to water vapor and 40 °C environmental conditions in a stove for up to 42 days. Several specimens of each type are taken out at regular intervals and tested to examine the water absorption, mechanical properties, and thermal characterization. The results show that the stiffness was significantly reduced after 24 h due to matrix degradation, while the strength was reduced only after three weeks.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Continuum Mechanics and Structural Analysis Department, Carlos III University of Madrid, Av. Universidad, 30, 28911 Leganes, Spain.
- Science and Engineering Materials Department, Carlos III University of Madrid, Av. Universidad, 30, 28911 Leganes, Spain.
- Mechanical Engineering Department, Pontificia Comillas University of Madrid, C/Alberto Aguilera, 25, 28015 Madrid, Spain.
ORCID-Profile: Liujiao Wang, Juana Abenojar, Miguel A Martínez, Carlos Santiuste
Förderung
- Ministerio de Ciencia e Innovación
- FEDER, Spain
Zitieren
APA
Wang, L., Abenojar, J., Martínez, M. A., & Santiuste, C. (2024). Degradation of Mechanical Properties of Flax/PLA Composites in Hygrothermal Aging Conditions. Polymers, 16(4), 528. https://doi.org/10.3390/polym16040528
Vancouver
Wang L, Abenojar J, Martínez MA, Santiuste C. Degradation of Mechanical Properties of Flax/PLA Composites in Hygrothermal Aging Conditions. Polymers. 2024;16(4):528. doi:10.3390/polym16040528
BibTeX
@article{Wang2024,
author = {Wang, Liujiao and Abenojar, Juana and Martínez, Miguel A and Santiuste, Carlos},
title = {Degradation of Mechanical Properties of Flax/PLA Composites in Hygrothermal Aging Conditions},
journal = {Polymers},
year = {2024},
volume = {16},
number = {4},
pages = {528},
doi = {10.3390/polym16040528}
}
EUVIMED