EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Surface Modification of Flax Fibers with TMCTS-Based PECVD for Improved Thermo-Mechanical Properties of PLA/Flax Fiber Composites

Ghane Moradkhani iD, Jacopo Profili iD, Mathieu Robert, Gaétan Laroche iD, Saïd Elkoun iD, Frej Mighri

Polymers · 29.01.2024 · 16 (3) · 360

DOI: 10.3390/polym16030360 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 29.01.2024. Verfasst von Ghane Moradkhani und 5 weiteren Autor:innen. Beteiligte Einrichtung: Center for Innovation in Technological Eco-Design (CITE), University of Sherbrooke, Sherbrooke, QC J1K 2R1, Canada. Die Arbeit wurde bisher 22-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Significant progress has been made in recent years in the use of atmospheric pressure plasma techniques for surface modification. This research focused on the beneficial effects of these processes on natural by-products, specifically those involving natural fiber-based materials. The study explored the deposition of hydrophobic organosilicon-like thin films onto flax fibres through plasma-enhanced chemical vapour deposition (PECVD), using tetramethylcyclotetrasiloxane (TMCTS) as the precursor. After the successful deposition of hydrophobic organosilicon-like thin films onto the flax fibres, polylactic acid (PLA) composite materials were fabricated. This fabrication process sets the stage for an in-depth analysis of the modified materials. Subsequently, these flax fabrics were subjected to meticulous characterization through scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), and contact angle measurements. The results demonstrated successful TMCTS deposition on the surface which led to a complete hydrophobization of the flax fibers. Mechanical tests of the PLA/flax fibre composites revealed a significant improvement in load transfer and interfacial compatibility following the surface modification of the flax fibres. This improvement was attributed to the enhanced adhesion between the modified fibres and the PLA matrix. The findings highlight the potential of TMCTS-based PECVD as a practical surface modification technique, effectively enhancing the mechanical properties of PLA/flax fibre composites. These developments open exciting possibilities for sustainable and high-performance composite materials in various industries.

Schlagwörter

Stichwörter der Autor:innen

PECVDflax fibermechanical propertiesorganosilicon

Autor:innen und Institutionen

  • Center for Innovation in Technological Eco-Design (CITE), University of Sherbrooke, Sherbrooke, QC J1K 2R1, Canada.
  • Research Center for High Performance Polymer and Composite Systems, CREPEC, Montreal, QC H3A 0C3, Canada.
  • Quebec Center for Functional Materials, QCAM, Montreal, QC H2V 0B3, Canada.
  • Centre de Recherche du Centre Hospitalier Universitaire de Québec, Hôpital St.-François d'Assise, Quebec, QC G1L 3L5, Canada.
  • Department of Chemical Engineering, Laval University, Quebec, QC G1V 0A6, Canada.

ORCID-Profile: Ghane Moradkhani, Jacopo Profili, Gaétan Laroche, Saïd Elkoun

Zitieren

APA

Moradkhani, G., Profili, J., Robert, M., Laroche, G., Elkoun, S., & Mighri, F. (2024). Surface Modification of Flax Fibers with TMCTS-Based PECVD for Improved Thermo-Mechanical Properties of PLA/Flax Fiber Composites. Polymers, 16(3), 360. https://doi.org/10.3390/polym16030360

Vancouver

Moradkhani G, Profili J, Robert M, Laroche G, Elkoun S, Mighri F. Surface Modification of Flax Fibers with TMCTS-Based PECVD for Improved Thermo-Mechanical Properties of PLA/Flax Fiber Composites. Polymers. 2024;16(3):360. doi:10.3390/polym16030360

BibTeX
@article{Moradkhani2024,
  author = {Moradkhani, Ghane and Profili, Jacopo and Robert, Mathieu and Laroche, Gaétan and Elkoun, Saïd and Mighri, Frej},
  title = {Surface Modification of Flax Fibers with TMCTS-Based PECVD for Improved Thermo-Mechanical Properties of PLA/Flax Fiber Composites},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {3},
  pages = {360},
  doi = {10.3390/polym16030360}
}
Kostenlos starten →