EUVIMEDOpdag EUVIMED
Open access · CC BY 4.0

Influences of Fiber Volume Content on the Mechanical Properties of 2D Plain Carbon-Fiber Woven Composite Materials

Jingliang Gong iD, Nouman Saeed iD, Xigui Huang, Weiwei Tian, Lixiao Li iD, Jian Song

Polymers · 2023-12-29 · 16 (1) · 108

DOI: 10.3390/polym16010108 ↗

At a glance

Journal article in Polymers, published online on 2023-12-29. Written by Jingliang Gong and 5 co-authors. Institution: College of Civil and Transportation Engineering, Shenzhen University, Shenzhen 518060, China. Cited 35 times so far (Crossref); 34 references. The full text is freely available (open access, CC BY 4.0). Funded by: National Natural Science Foundation of China, Shenzhen Natural Science Foundation, Natural Science Foundation of Guangdong Province.

AbstractSubjectsBibliografiske oplysningerCiteRelated studies

Abstract (original language)

The influence of fiber volume content on the mechanical properties of two-dimensional (2D) plain carbon-fiber woven composites is a crucial concern that necessitates immediate attention for large-scale applications in wind turbine blades. In this study, various mechanical tests were conducted on 2D plain carbon-fiber woven composites with different fiber volume contents, and the influences of fiber volume content on the mechanical properties and failure mode of the composite material were analyzed. Using carbon fiber as reinforcement and epoxy resin as a matrix, three types of plates with fiber volume contents of 47%, 50% and 53% were fabricated by using autoclave technology. The tensile, compression and interlaminar shear tests of the two-dimensional woven composites were carried out using MTS series testing machines. The influences of fiber volume content on tensile strength and modulus, compressive strength and modulus, interlaminar shear strength and shear strain energy were investigated. Additionally, the progressive damage development of these two-dimensional woven composites under different stress states was studied using scanning electron microscopy (SEM). The results indicate that the tensile strength and compressive strength increase almost linearly with the increase in fiber volume content, while the interlaminar shear strength increases slowly at low fiber volume content and rapidly at high fiber volume content. The tensile modulus of elasticity slightly increases as the fiber volume content increases, whereas the compressive modulus remains stable at low fiber volume content but gradually decreases at high fiber volume content. With the increase in fiber volume content, the shear strain energy of the specimen increases significantly.

Subjects

Author keywords

2D plain-pattern carbon-fiber woven compositesfiber volume fractionmechanical performanceprogressive damage evolution

Authors and institutions

  • College of Civil and Transportation Engineering, Shenzhen University, Shenzhen 518060, China.
  • School of Civil and Environmental Engineering, Harbin Institute of Technology (Shenzhen), Shenzhen 518055, China.

ORCID profiles: Jingliang Gong, Nouman Saeed, Lixiao Li

Funding

  • National Natural Science Foundation of China
  • Shenzhen Natural Science Foundation
  • Natural Science Foundation of Guangdong Province
  • Natural Science Foundation of Shenzhen

Cite

APA

Gong, J., Saeed, N., Huang, X., Tian, W., Li, L., & Song, J. (2023). Influences of Fiber Volume Content on the Mechanical Properties of 2D Plain Carbon-Fiber Woven Composite Materials. Polymers, 16(1), 108. https://doi.org/10.3390/polym16010108

Vancouver

Gong J, Saeed N, Huang X, Tian W, Li L, Song J. Influences of Fiber Volume Content on the Mechanical Properties of 2D Plain Carbon-Fiber Woven Composite Materials. Polymers. 2023;16(1):108. doi:10.3390/polym16010108

BibTeX
@article{Gong2023,
  author = {Gong, Jingliang and Saeed, Nouman and Huang, Xigui and Tian, Weiwei and Li, Lixiao and Song, Jian},
  title = {Influences of Fiber Volume Content on the Mechanical Properties of 2D Plain Carbon-Fiber Woven Composite Materials},
  journal = {Polymers},
  year = {2023},
  volume = {16},
  number = {1},
  pages = {108},
  doi = {10.3390/polym16010108}
}
Start for free →