EUVIMEDScopri EUVIMED
Open access · CC BY 4.0

Cycloaliphatic Quaternary Ammonium Functionalized Poly(oxindole biphenyl) Based Anion-Exchange Membranes for Water Electrolysis: Stability and Performance

Sara Gjoshi, Paraskevi Loukopoulou, Michaela Plevova iD, Jaromir Hnat, Karel Bouzek, Valadoula Deimede iD

Polymers · 2023-12-28 · 16 (1) · 99

DOI: 10.3390/polym16010099 ↗

At a glance

Journal article in Polymers, published online on 2023-12-28. Written by Sara Gjoshi and 5 co-authors. Institution: Department of Chemistry, University of Patras, GR-26504 Patras, Greece. Cited 18 times so far (Crossref); 53 references. The full text is freely available (open access, CC BY 4.0). Funded by: European Union.

AbstractSubjectsDati bibliograficiCiteRelated studies

Abstract (original language)

Mechanically robust anion-exchange membranes (AEMs) with high conductivity and long-term alkali resistance are needed for water electrolysis application. In this work, aryl-ether free polyaromatics containing isatin moieties were prepared via super acid-catalyzed copolymerization, followed by functionalization with alkaline stable cyclic quaternary ammonium (QA) cationic groups, to afford high performance AEMs for application in water electrolysis. The incorporation of side functional cationic groups (pyrrolidinium and piperidinium) onto a polymer backbone via a flexible alkyl spacer aimed at conductivity and alkaline stability improvement. The effect of cation structure on the properties of prepared AEMs was thoroughly studied. Pyrrolidinium- and piperidinium-based AEMs showed similar electrolyte uptakes and no obvious phase separation, as revealed by SAXS and further supported by AFM and TEM data. In addition, these AEMs displayed high conductivity values (81. 5 and 120 mS cm−1 for pyrrolidinium- and piperidinium-based AEM, respectively, at 80 °C) and excellent alkaline stability after 1 month aging in 2M KOH at 80 °C. Especially, a pyrrolidinium-based AEM membrane preserved 87% of its initial conductivity value, while at the same time retaining its flexibility and mechanical robustness after storage in alkaline media (2M KOH) for 1 month at 80 °C. Based on 1H NMR data, the conductivity loss observed after the aging test is mainly related to the piperidinium degradation that took place, probably via ring-opening Hofmann elimination, alkyl spacer scission and nucleophilic substitution reactions as well. The synthesized AEMs were also tested in an alkaline water electrolysis cell. Piperidinium-based AEM showed superior performance compared to its pyrrolidinium analogue, owing to its higher conductivity as revealed by EIS data, further confirming the ex situ conductivity measurements.

Subjects

Author keywords

AEMsalkaline stabilityalkaline water electrolysisionic conductivitypiperidiniumpoly(oxindole biphenyl) backbonepyrrolidinium

Authors and institutions

  • Department of Chemistry, University of Patras, GR-26504 Patras, Greece.
  • Department of Inorganic Technology, University of Chemistry and Technology, Prague, Technická 5, 16628 Prague, Czech Republic.

ORCID profiles: Michaela Plevova, Valadoula Deimede

Funding

  • European Union

Cite

APA

Gjoshi, S., Loukopoulou, P., Plevova, M., Hnat, J., Bouzek, K., & Deimede, V. (2023). Cycloaliphatic Quaternary Ammonium Functionalized Poly(oxindole biphenyl) Based Anion-Exchange Membranes for Water Electrolysis: Stability and Performance. Polymers, 16(1), 99. https://doi.org/10.3390/polym16010099

Vancouver

Gjoshi S, Loukopoulou P, Plevova M, Hnat J, Bouzek K, Deimede V. Cycloaliphatic Quaternary Ammonium Functionalized Poly(oxindole biphenyl) Based Anion-Exchange Membranes for Water Electrolysis: Stability and Performance. Polymers. 2023;16(1):99. doi:10.3390/polym16010099

BibTeX
@article{Gjoshi2023,
  author = {Gjoshi, Sara and Loukopoulou, Paraskevi and Plevova, Michaela and Hnat, Jaromir and Bouzek, Karel and Deimede, Valadoula},
  title = {Cycloaliphatic Quaternary Ammonium Functionalized Poly(oxindole biphenyl) Based Anion-Exchange Membranes for Water Electrolysis: Stability and Performance},
  journal = {Polymers},
  year = {2023},
  volume = {16},
  number = {1},
  pages = {99},
  doi = {10.3390/polym16010099}
}
Start for free →