EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Biodegradable UV-Protective Composite Film from Cellulosic Waste: Utilisation of Cotton Gin Motes as Biocomponent

Zengxiao Cai, Abu Naser Md Ahsanul Haque iD, Renuka Dhandapani, Maryam Naebe iD

Polymers · 27.12.2023 · 16 (1) · 88

DOI: 10.3390/polym16010088 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 27.12.2023. Verfasst von Zengxiao Cai und 3 weiteren Autor:innen. Beteiligte Einrichtung: Institute for Frontier Materials, Deakin University, Geelong, VIC 3216, Australia. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Cotton Incorporated.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

With an increase in environmental pollution and microplastic problems, it is more urgent now to replace non-biodegradable films with biodegradable films that are low-cost and from renewable resources. Cotton gin motes (GM), a type of cellulosic waste that is generated from cotton ginning, is an excellent candidate for fabricating biodegradable films due to its properties and abundance. In this study, GM was first mechanically milled into a fine powder, followed by compounding with polycaprolactone (PCL) and extruded to produce composite pellets which were then compress-moulded into composite films. This environmentally friendly process used physical processing and all the materials were consumed in the process without generating any waste residue. To improve the compatibility and mixing properties between GM and PCL, the use of a plasticiser (polyethylene glycol) was considered. A high content of GM powder (up to 50%) was successfully compounded with the polymer. The SEM images of the composite films showed smooth surface morphology and well-distributed GM powder in the PCL matrix. The added advantage of compounding GM with the polymer matrix was that the composite film developed UV-shielding properties due to the presence of lignin in the GM powder. This property will be critical for films used in UV-resistance applications. Furthermore, the composite even with high GM content (50%), showed good mechanical properties, with 9.5 MPa yield strength and 442% elongation, which was only a 50% decrease in elongation when compared with clear PCL film. The soil biodegradation of GM composite films under controlled temperature (20 °C) and humidity (50%) for 1 month showed around 41% weight loss. Overall, this study demonstrates the potential of GM to be used as a biodegradable and UV-protective composite film for a wide array of applications, such as packaging and UV-protective coverings.

Schlagwörter

Stichwörter der Autor:innen

UV protectionbiodegradable packagingcotton ginningcotton wastesingle-use plastics

Autor:innen und Institutionen

  • Institute for Frontier Materials, Deakin University, Geelong, VIC 3216, Australia.
  • Cotton Incorporated, 6399 Weston Parkway, Cary, NC 27513, USA.

ORCID-Profile: Abu Naser Md Ahsanul Haque, Maryam Naebe

Förderung

  • Cotton Incorporated

Zitieren

APA

Cai, Z., Haque, A. N. M. A., Dhandapani, R., & Naebe, M. (2023). Biodegradable UV-Protective Composite Film from Cellulosic Waste: Utilisation of Cotton Gin Motes as Biocomponent. Polymers, 16(1), 88. https://doi.org/10.3390/polym16010088

Vancouver

Cai Z, Haque ANMA, Dhandapani R, Naebe M. Biodegradable UV-Protective Composite Film from Cellulosic Waste: Utilisation of Cotton Gin Motes as Biocomponent. Polymers. 2023;16(1):88. doi:10.3390/polym16010088

BibTeX
@article{Cai2023,
  author = {Cai, Zengxiao and Haque, Abu Naser Md Ahsanul and Dhandapani, Renuka and Naebe, Maryam},
  title = {Biodegradable UV-Protective Composite Film from Cellulosic Waste: Utilisation of Cotton Gin Motes as Biocomponent},
  journal = {Polymers},
  year = {2023},
  volume = {16},
  number = {1},
  pages = {88},
  doi = {10.3390/polym16010088}
}
Kostenlos starten →