Valorization of Cellulosic Waste from Artichoke for Incorporation into Biodegradable Polylactic Acid Matrices
Polymers · 30.09.2024 · 16 (19) · 2778
DOI: 10.3390/polym16192778 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 30.09.2024. Verfasst von Alexandra Llidó Barragán und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical and Materials Engineering, Universitat Politècnica de València (UPV), Plz. Ferrándiz y Carbonell, s/n, 03801 Alcoy, Spain. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This study presents the development of ecological compounds using polylactic acid (PLA) and artichoke flour with the aim of obtaining materials with properties like commercial PLA. PLA biocomposites with different concentrations of green artichoke (HV) and boiled artichoke (HH) (1, 3, 5, 7, 10 and 20% by weight) were manufactured through an extrusion and injection process. Structural, mechanical, physical and color tests were carried out to analyze the effect of lignocellulosic particles on the biopolymeric matrix. The Shore D hardness, elongation at break and heat deflection temperature (HDT) of the PLA/HV and PLA/HH samples showed similar values to pure PLA, indicating that high concentrations of both fillers did not severely compromise these properties. However, reductions in the tensile strength, impact strength and Young’s modulus were observed, and both flours had increased water absorption capacity. FTIR analysis identified the characteristic peaks of the biocomposites and the ratio of the groups regarding the amount of added filler. The SEM revealed low interfacial adhesion between the polymer matrix and the filler. This study represents a significant advance in the valorization and application of circular economy principles to agricultural waste, such as artichoke waste. PLA/HV biocomposites make a substantial contribution to sustainable materials technology, aligning with the goals of the 2030 agenda to reduce environmental impacts and promote sustainable development.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Mechanical and Materials Engineering, Universitat Politècnica de València (UPV), Plz. Ferrándiz y Carbonell, s/n, 03801 Alcoy, Spain.
ORCID-Profile: Francisco Parres García, José Enrique Crespo Amorós
Zitieren
APA
Llidó Barragán, A., Calle Salas, A., Parres García, F., & Crespo Amorós, J. E. (2024). Valorization of Cellulosic Waste from Artichoke for Incorporation into Biodegradable Polylactic Acid Matrices. Polymers, 16(19), 2778. https://doi.org/10.3390/polym16192778
Vancouver
Llidó Barragán A, Calle Salas A, Parres García F, Crespo Amorós JE. Valorization of Cellulosic Waste from Artichoke for Incorporation into Biodegradable Polylactic Acid Matrices. Polymers. 2024;16(19):2778. doi:10.3390/polym16192778
BibTeX
@article{LlidBarragn2024,
author = {Llidó Barragán, Alexandra and Calle Salas, Alejandro de la and Parres García, Francisco and Crespo Amorós, José Enrique},
title = {Valorization of Cellulosic Waste from Artichoke for Incorporation into Biodegradable Polylactic Acid Matrices},
journal = {Polymers},
year = {2024},
volume = {16},
number = {19},
pages = {2778},
doi = {10.3390/polym16192778}
}
EUVIMED