Effect of a Nanocellulose Addition on the Mechanical Properties of Paper
Polymers · 2023-12-26 · 16 (1) · 73
DOI: 10.3390/polym16010073 ↗At a glance
Journal article in Polymers, published online on 2023-12-26. Written by Josef Bárta and 5 co-authors. Institution: Department of Wood Processing and Biomaterials, Faculty of Forestry and Wood Sciences, Czech University of Life Sciences Prague, Kamýcká 129, 165 00 …. Cited 14 times so far (Crossref); 38 references. The full text is freely available (open access, CC BY 4.0).
Abstract (original language)
Nowadays, the emphasis is on increasing the durability of all products. For this reason, it is also advisable to look into extending the durability of paper products. The main reason for using flax pulp is that flax and cotton pulp are widely used for the production of banknotes due to their higher strength. This paper deals with flax pulp with the addition of nanocellulose, which should further enhance the mechanical properties of the pulp. The tensile strength, breaking length, and tensile energy absorption index were evaluated as the key mechanical properties. At the same time, the effect of the addition of nanocellulose, whether it was added to the pulp mass or applied to the later produced paper as a spray or coating, was tested in comparison to paper without the addition of nanocellulose. The best mechanical properties, i.e., tensile strength, were achieved for the highest addition of 5% of nanocellulose into the pulp, at 24.3 Nm∙g−1, and for the coating application, at 28.7 Nm∙g−1, compared to the flax pulp without the addition, where the tensile strength was 20.5 Nm∙g−1. The results of this research are used for the assessment of nanocellulose as a natural compatible additive to enhance the strength properties of cellulose-based materials.
Subjects
Author keywords
Authors and institutions
- Department of Wood Processing and Biomaterials, Faculty of Forestry and Wood Sciences, Czech University of Life Sciences Prague, Kamýcká 129, 165 00 Prague, Czech Republic.
- Faculty of Forestry and Wood Sciences, Czech University of Life Sciences Prague, Kamýcká 129, 165 00 Prague, Czech Republic.
ORCID profiles: Josef Bárta, Kateřina Hájková, Adam Sikora, Tereza Jurczyková
Cite
APA
Bárta, J., Hájková, K., Sikora, A., Jurczyková, T., Popelková, D., & Kalous, P. (2023). Effect of a Nanocellulose Addition on the Mechanical Properties of Paper. Polymers, 16(1), 73. https://doi.org/10.3390/polym16010073
Vancouver
Bárta J, Hájková K, Sikora A, Jurczyková T, Popelková D, Kalous P. Effect of a Nanocellulose Addition on the Mechanical Properties of Paper. Polymers. 2023;16(1):73. doi:10.3390/polym16010073
BibTeX
@article{Brta2023,
author = {Bárta, Josef and Hájková, Kateřina and Sikora, Adam and Jurczyková, Tereza and Popelková, Daniela and Kalous, Petr},
title = {Effect of a Nanocellulose Addition on the Mechanical Properties of Paper},
journal = {Polymers},
year = {2023},
volume = {16},
number = {1},
pages = {73},
doi = {10.3390/polym16010073}
}
EUVIMED