EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of a Nanocellulose Addition on the Mechanical Properties of Paper

Josef Bárta iD, Kateřina Hájková iD, Adam Sikora iD, Tereza Jurczyková iD, Daniela Popelková, Petr Kalous

Polymers · 26.12.2023 · 16 (1) · 73

DOI: 10.3390/polym16010073 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 26.12.2023. Verfasst von Josef Bárta und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Wood Processing and Biomaterials, Faculty of Forestry and Wood Sciences, Czech University of Life Sciences Prague, Kamýcká 129, 165 00 …. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Nowadays, the emphasis is on increasing the durability of all products. For this reason, it is also advisable to look into extending the durability of paper products. The main reason for using flax pulp is that flax and cotton pulp are widely used for the production of banknotes due to their higher strength. This paper deals with flax pulp with the addition of nanocellulose, which should further enhance the mechanical properties of the pulp. The tensile strength, breaking length, and tensile energy absorption index were evaluated as the key mechanical properties. At the same time, the effect of the addition of nanocellulose, whether it was added to the pulp mass or applied to the later produced paper as a spray or coating, was tested in comparison to paper without the addition of nanocellulose. The best mechanical properties, i.e., tensile strength, were achieved for the highest addition of 5% of nanocellulose into the pulp, at 24.3 Nm∙g−1, and for the coating application, at 28.7 Nm∙g−1, compared to the flax pulp without the addition, where the tensile strength was 20.5 Nm∙g−1. The results of this research are used for the assessment of nanocellulose as a natural compatible additive to enhance the strength properties of cellulose-based materials.

Schlagwörter

Stichwörter der Autor:innen

kraft pulpnanocellulosesoda pulptensile strength

Autor:innen und Institutionen

  • Department of Wood Processing and Biomaterials, Faculty of Forestry and Wood Sciences, Czech University of Life Sciences Prague, Kamýcká 129, 165 00 Prague, Czech Republic.
  • Faculty of Forestry and Wood Sciences, Czech University of Life Sciences Prague, Kamýcká 129, 165 00 Prague, Czech Republic.

ORCID-Profile: Josef Bárta, Kateřina Hájková, Adam Sikora, Tereza Jurczyková

Zitieren

APA

Bárta, J., Hájková, K., Sikora, A., Jurczyková, T., Popelková, D., & Kalous, P. (2023). Effect of a Nanocellulose Addition on the Mechanical Properties of Paper. Polymers, 16(1), 73. https://doi.org/10.3390/polym16010073

Vancouver

Bárta J, Hájková K, Sikora A, Jurczyková T, Popelková D, Kalous P. Effect of a Nanocellulose Addition on the Mechanical Properties of Paper. Polymers. 2023;16(1):73. doi:10.3390/polym16010073

BibTeX
@article{Brta2023,
  author = {Bárta, Josef and Hájková, Kateřina and Sikora, Adam and Jurczyková, Tereza and Popelková, Daniela and Kalous, Petr},
  title = {Effect of a Nanocellulose Addition on the Mechanical Properties of Paper},
  journal = {Polymers},
  year = {2023},
  volume = {16},
  number = {1},
  pages = {73},
  doi = {10.3390/polym16010073}
}
Kostenlos starten →