EUVIMEDOpdag EUVIMED
Open access · CC BY 4.0

Effect of Resin Bleed Out on Compaction Behavior of the Fiber Tow Gap Region during Automated Fiber Placement Manufacturing

Von Clyde Jamora, Virginia Rauch, Sergii G Kravchenko iD, Oleksandr G Kravchenko

Polymers · 2023-12-21 · 16 (1) · 31

DOI: 10.3390/polym16010031 ↗

At a glance

Journal article in Polymers, published online on 2023-12-21. Written by Von Clyde Jamora and 3 co-authors. Institution: Department of Aerospace and Mechanical Engineering, Old Dominion University, Norfolk, VA 23529, USA. Cited 26 times so far (Crossref); 51 references. The full text is freely available (open access, CC BY 4.0). Funded by: National Science Foundation, NSF Scholarship in STEM, Graduate Award in Mechanical and Aerospace Engineering.

AbstractSubjectsBibliografiske oplysningerCiteRelated studies

Abstract (original language)

Automated fiber placement is a state-of-the-art manufacturing method which allows for precise control over layup design. However, AFP results in irregular morphology due to fiber tow deposition induced features such as tow gaps and overlaps. Factors such as the squeeze flow and resin bleed out, combined with large non-linear deformation, lead to morphological variability. To understand these complex interacting phenomena, a coupled multiphysics finite element framework was developed to simulate the compaction behavior around fiber tow gap regions, which consists of coupled chemo-rheological and flow-compaction analysis. The compaction analysis incorporated a visco-hyperelastic constitutive model with anisotropic tensorial prepreg viscosity, which depends on the resin degree of cure and local fiber orientation and volume fraction. The proposed methodology was validated using the compaction of unidirectional tows and layup with a fiber tow gap. The proposed approach considered the effect of resin bleed out into the gap region, leading to the formation of a resin-rich pocket with a complex non-uniform morphology.

Subjects

Author keywords

automated fiber placementcompactionfinite element analysisprocess modeling

Authors and institutions

  • Department of Aerospace and Mechanical Engineering, Old Dominion University, Norfolk, VA 23529, USA.
  • Department of Materials Engineering, The University of British Columbia, Vancouver, BC V6T 1Z4, Canada.

ORCID profiles: Sergii G Kravchenko

Funding

  • National Science Foundation
  • NSF Scholarship in STEM
  • Graduate Award in Mechanical and Aerospace Engineering

Cite

APA

Jamora, V. C., Rauch, V., Kravchenko, S. G., & Kravchenko, O. G. (2023). Effect of Resin Bleed Out on Compaction Behavior of the Fiber Tow Gap Region during Automated Fiber Placement Manufacturing. Polymers, 16(1), 31. https://doi.org/10.3390/polym16010031

Vancouver

Jamora VC, Rauch V, Kravchenko SG, Kravchenko OG. Effect of Resin Bleed Out on Compaction Behavior of the Fiber Tow Gap Region during Automated Fiber Placement Manufacturing. Polymers. 2023;16(1):31. doi:10.3390/polym16010031

BibTeX
@article{Jamora2023,
  author = {Jamora, Von Clyde and Rauch, Virginia and Kravchenko, Sergii G and Kravchenko, Oleksandr G},
  title = {Effect of Resin Bleed Out on Compaction Behavior of the Fiber Tow Gap Region during Automated Fiber Placement Manufacturing},
  journal = {Polymers},
  year = {2023},
  volume = {16},
  number = {1},
  pages = {31},
  doi = {10.3390/polym16010031}
}
Start for free →