EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Resin Bleed Out on Compaction Behavior of the Fiber Tow Gap Region during Automated Fiber Placement Manufacturing

Von Clyde Jamora, Virginia Rauch, Sergii G Kravchenko iD, Oleksandr G Kravchenko

Polymers · 21.12.2023 · 16 (1) · 31

DOI: 10.3390/polym16010031 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 21.12.2023. Verfasst von Von Clyde Jamora und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Aerospace and Mechanical Engineering, Old Dominion University, Norfolk, VA 23529, USA. Die Arbeit wurde bisher 26-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science Foundation, NSF Scholarship in STEM, Graduate Award in Mechanical and Aerospace Engineering.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Automated fiber placement is a state-of-the-art manufacturing method which allows for precise control over layup design. However, AFP results in irregular morphology due to fiber tow deposition induced features such as tow gaps and overlaps. Factors such as the squeeze flow and resin bleed out, combined with large non-linear deformation, lead to morphological variability. To understand these complex interacting phenomena, a coupled multiphysics finite element framework was developed to simulate the compaction behavior around fiber tow gap regions, which consists of coupled chemo-rheological and flow-compaction analysis. The compaction analysis incorporated a visco-hyperelastic constitutive model with anisotropic tensorial prepreg viscosity, which depends on the resin degree of cure and local fiber orientation and volume fraction. The proposed methodology was validated using the compaction of unidirectional tows and layup with a fiber tow gap. The proposed approach considered the effect of resin bleed out into the gap region, leading to the formation of a resin-rich pocket with a complex non-uniform morphology.

Schlagwörter

Stichwörter der Autor:innen

automated fiber placementcompactionfinite element analysisprocess modeling

Autor:innen und Institutionen

  • Department of Aerospace and Mechanical Engineering, Old Dominion University, Norfolk, VA 23529, USA.
  • Department of Materials Engineering, The University of British Columbia, Vancouver, BC V6T 1Z4, Canada.

ORCID-Profile: Sergii G Kravchenko

Förderung

  • National Science Foundation
  • NSF Scholarship in STEM
  • Graduate Award in Mechanical and Aerospace Engineering

Zitieren

APA

Jamora, V. C., Rauch, V., Kravchenko, S. G., & Kravchenko, O. G. (2023). Effect of Resin Bleed Out on Compaction Behavior of the Fiber Tow Gap Region during Automated Fiber Placement Manufacturing. Polymers, 16(1), 31. https://doi.org/10.3390/polym16010031

Vancouver

Jamora VC, Rauch V, Kravchenko SG, Kravchenko OG. Effect of Resin Bleed Out on Compaction Behavior of the Fiber Tow Gap Region during Automated Fiber Placement Manufacturing. Polymers. 2023;16(1):31. doi:10.3390/polym16010031

BibTeX
@article{Jamora2023,
  author = {Jamora, Von Clyde and Rauch, Virginia and Kravchenko, Sergii G and Kravchenko, Oleksandr G},
  title = {Effect of Resin Bleed Out on Compaction Behavior of the Fiber Tow Gap Region during Automated Fiber Placement Manufacturing},
  journal = {Polymers},
  year = {2023},
  volume = {16},
  number = {1},
  pages = {31},
  doi = {10.3390/polym16010031}
}
Kostenlos starten →