Experimental and Numerical Study of Printing Strategy Impact on the Mechanical Properties of Sustainable PLA Materials
Polymers · 07.12.2023 · 15 (24) · 4639
DOI: 10.3390/polym15244639 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 07.12.2023. Verfasst von Emil Spišák und 4 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Mechanical Engineering, Technical University of Košice, Letná 9, 042 00 Košice, Slovakia. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Slovak Agency, The Ministry of Education, Science, Research and Sport of the Slovak Republic.
Abstract (Originalsprache)
This article is focused on a mechanical properties investigation of three types of sustainable poly lactic acid materials manufactured using the fused filament fabrication process. The purpose of this work was to study the impact of printing strategies on the mechanical properties and predict mechanical behavior under tensile loading using finite element analysis. The testing of mechanical properties was conducted according to the ISO 527 standard. The numerical simulations were conducted in Simufact Forming 2022 software. Analysis of the experimental data showed a dependance of mechanical properties on the used printing strategy. The Clear PLA samples printed in the XY plane exhibited a 43% reduction in tensile strength and a 49% reduction in elongation compared to samples printed from the same material in YZ plane. The experimental results show the influence of the printing orientation on the mechanical properties of 3D-printed samples.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Faculty of Mechanical Engineering, Technical University of Košice, Letná 9, 042 00 Košice, Slovakia.
- Faculty of Manufacturing Technologies with a Seat in Prešov, Technical University of Kosice, Bayerova 1, 080 01 Prešov, Slovakia.
ORCID-Profile: Emil Spišák, Janka Majerníková, Peter Mulidrán
Förderung
- Slovak Agency
- The Ministry of Education, Science, Research and Sport of the Slovak Republic
Zitieren
APA
Spišák, E., Nováková-Marcinčínová, E., Majerníková, J., Mulidrán, P., & Nováková-Marcinčínová, Ľ. (2023). Experimental and Numerical Study of Printing Strategy Impact on the Mechanical Properties of Sustainable PLA Materials. Polymers, 15(24), 4639. https://doi.org/10.3390/polym15244639
Vancouver
Spišák E, Nováková-Marcinčínová E, Majerníková J, Mulidrán P, Nováková-Marcinčínová Ľ. Experimental and Numerical Study of Printing Strategy Impact on the Mechanical Properties of Sustainable PLA Materials. Polymers. 2023;15(24):4639. doi:10.3390/polym15244639
BibTeX
@article{Spik2023,
author = {Spišák, Emil and Nováková-Marcinčínová, Ema and Majerníková, Janka and Mulidrán, Peter and Nováková-Marcinčínová, Ľudmila},
title = {Experimental and Numerical Study of Printing Strategy Impact on the Mechanical Properties of Sustainable PLA Materials},
journal = {Polymers},
year = {2023},
volume = {15},
number = {24},
pages = {4639},
doi = {10.3390/polym15244639}
}
EUVIMED