EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Preceramic Polymers for Additive Manufacturing of Silicate Ceramics

Fateme Sarraf, Sergey V Churakov, Frank Clemens iD

Polymers · 08.11.2023 · 15 (22) · 4360

DOI: 10.3390/polym15224360 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Polymers, online erschienen am 08.11.2023. Verfasst von Fateme Sarraf und 2 weiteren Autor:innen. Beteiligte Einrichtung: Empa-Swiss Federal Laboratories for Materials Science and Technology, Ueberlandstrasse 129, CH-8600 Dübendorf, Switzerland. Die Arbeit wurde bisher 33-mal zitiert (Crossref) und nennt 138 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Swiss National Science Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The utilization of preceramic polymers (PCPs) to produce both oxide and non-oxide ceramics has caught significant interest, owing to their exceptional characteristics. Diverse types of polymer-derived ceramics (PDCs) synthesized by using various PCPs have demonstrated remarkable characteristics such as exceptional thermal stability, resistance to corrosion and oxidation at elevated temperatures, biocompatibility, and notable dielectric properties, among others. The application of additive manufacturing techniques to produce PDCs opens up new opportunities for manufacturing complex and unconventional ceramic structures with complex designs that might be challenging or impossible to achieve using traditional manufacturing methods. This is particularly advantageous in industries like aerospace, automotive, and electronics. In this review, various categories of preceramic polymers employed in the synthesis of polymer-derived ceramics are discussed, with a particular focus on the utilization of polysiloxane and polysilsesquioxanes to generate silicate ceramics. Further, diverse additive manufacturing techniques adopted for the fabrication of polymer-derived silicate ceramics are described.

Schlagwörter

Stichwörter der Autor:innen

3D printadditive manufacturingpolysilsesquioxanepreceramic polymersilicate

Autor:innen und Institutionen

  • Empa-Swiss Federal Laboratories for Materials Science and Technology, Ueberlandstrasse 129, CH-8600 Dübendorf, Switzerland.
  • Institute of Geological Sciences, University of Bern, Hochschulstrasse 6, CH-3012 Bern, Switzerland.
  • Paul Scherrer Institute, Forschungsstrasse 111, CH-5232 Villigen, Switzerland.

ORCID-Profile: Frank Clemens

Förderung

  • Swiss National Science Foundation

Zitieren

APA

Sarraf, F., Churakov, S. V., & Clemens, F. (2023). Preceramic Polymers for Additive Manufacturing of Silicate Ceramics. Polymers, 15(22), 4360. https://doi.org/10.3390/polym15224360

Vancouver

Sarraf F, Churakov SV, Clemens F. Preceramic Polymers for Additive Manufacturing of Silicate Ceramics. Polymers. 2023;15(22):4360. doi:10.3390/polym15224360

BibTeX
@article{Sarraf2023,
  author = {Sarraf, Fateme and Churakov, Sergey V and Clemens, Frank},
  title = {Preceramic Polymers for Additive Manufacturing of Silicate Ceramics},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {22},
  pages = {4360},
  doi = {10.3390/polym15224360}
}
Kostenlos starten →