EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Additive Manufacturing of Advanced Ceramics Using Preceramic Polymers

Jinchen Han iD, Chang Liu iD, Robyn L Bradford-Vialva, Donald A Klosterman iD, Li Cao

Materials · 27.06.2023 · 16 (13) · 4636

DOI: 10.3390/ma16134636 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Materials, online erschienen am 27.06.2023. Verfasst von Jinchen Han und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical and Materials Engineering, University of Dayton, Dayton, OH 45469, USA. Die Arbeit wurde bisher 38-mal zitiert (Crossref) und nennt 150 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the University of Dayton, University of Dayton.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Ceramic materials are used in various industrial applications, as they possess exceptional physical, chemical, thermal, mechanical, electrical, magnetic, and optical properties. Ceramic structural components, especially those with highly complex structures and shapes, are difficult to fabricate with conventional methods, such as sintering and hot isostatic pressing (HIP). The use of preceramic polymers has many advantages, such as excellent processibility, easy shape change, and tailorable composition for fabricating high-performance ceramic components. Additive manufacturing (AM) is an evolving manufacturing technique that can be used to construct complex and intricate structural components. Integrating polymer-derived ceramics and AM techniques has drawn significant attention, as it overcomes the limitations and challenges of conventional fabrication approaches. This review discusses the current research that used AM technologies to fabricate ceramic articles from preceramic feedstock materials, and it demonstrates that AM processes are effective and versatile approaches for fabricating ceramic components. The future of producing ceramics using preceramic feedstock materials for AM processes is also discussed at the end.

Schlagwörter

Stichwörter der Autor:innen

3D printingadditive manufacturingceramic materialfeedstock materialpreceramic polymer

Autor:innen und Institutionen

  • Department of Chemical and Materials Engineering, University of Dayton, Dayton, OH 45469, USA.
  • Technical Center, Nippon Paint Automotive Americas, Inc., Cleveland, OH 44102, USA.
  • Air Force Research Laboratory (AFRL/RXMD), Manufacturing & Industrial Technologies Division, Wright-Patterson AFB, Dayton, OH 45433, USA.

ORCID-Profile: Jinchen Han, Chang Liu, Donald A Klosterman

Förderung

  • the University of Dayton
  • University of Dayton

Zitieren

APA

Han, J., Liu, C., Bradford-Vialva, R. L., Klosterman, D. A., & Cao, L. (2023). Additive Manufacturing of Advanced Ceramics Using Preceramic Polymers. Materials, 16(13), 4636. https://doi.org/10.3390/ma16134636

Vancouver

Han J, Liu C, Bradford-Vialva RL, Klosterman DA, Cao L. Additive Manufacturing of Advanced Ceramics Using Preceramic Polymers. Materials. 2023;16(13):4636. doi:10.3390/ma16134636

BibTeX
@article{Han2023,
  author = {Han, Jinchen and Liu, Chang and Bradford-Vialva, Robyn L and Klosterman, Donald A and Cao, Li},
  title = {Additive Manufacturing of Advanced Ceramics Using Preceramic Polymers},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {13},
  pages = {4636},
  doi = {10.3390/ma16134636}
}
Kostenlos starten →