EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Rotary Friction Welding of Dissimilar Polymer Rods Containing Metal Powder

Chil-Chyuan Kuo iD, Hong-Wei Chen, Song-Hua Huang

Polymers · 08.11.2023 · 15 (22) · 4354

DOI: 10.3390/polym15224354 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 08.11.2023. Verfasst von Chil-Chyuan Kuo und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Ming Chi University of Technology, No. 84, Gungjuan Road, Taishan District, New Taipei City 24301, Taiwan. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the Ministry of Science and Technology of Taiwan.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Three-dimensional printing is widely used for manufacturing a variety of functional components. However, the 3D printing machine substantially limits the size of the functional components. Rotary friction welding (RFW) is a possible solution to this problem. In addition, there is a notable scarcity of research directed toward the domain knowledge of RFW involving dissimilar polymer rods containing metal powder. In this study, two welding specimens fabricated by polylactic acid (PLA)-containing copper powder and PLA-containing aluminum powder were joined using a turning machine. After RFW, a bending test and a Shore A surface hardness test were performed to investigate the weld quality. It was found that the bending strength of the welded parts fabricated by RFW of PLA and PLA-containing Al powder rods can be enhanced by about 57.5% when the welded part is placed at 45 °C. Surface hardness test results showed that the surface hardness of the weld interface is better than that of the 3D printed parts, and the average surface hardness of the weld interface from RFW of PLA and PLA is the highest. The surface hardness of the weld joint is about 3% higher than that of the base material. The surface hardness of the heat-affected zone is about 3% lower than that of the base material. The average peak temperature of the welded joint is the highest in the RFW of PLA-containing Al powder and PLA-containing Al powder rods. The average peak temperature of the weld joint can be as high as 160 °C. The average peak temperature of the welded joint is the highest in the RFW of PLA-containing Cu powder and PLA-containing Cu powder rods. The average peak temperature of the welded joint can be as high as 144 °C. A technical database was built for the selection of ambient temperatures used for the RFW of dissimilar polymer rods containing metal powder and three base materials.

Schlagwörter

Stichwörter der Autor:innen

aluminum powderambient temperaturecopper powderpolylatic acidrotary friction welding

Autor:innen und Institutionen

  • Department of Mechanical Engineering, Ming Chi University of Technology, No. 84, Gungjuan Road, Taishan District, New Taipei City 24301, Taiwan.
  • Research Center for Intelligent Medical Devices, Ming Chi University of Technology, No. 84, Gungjuan Road, Taishan District, New Taipei City 24301, Taiwan.
  • Department of Mechanical Engineering, Chang Gung University, No. 259, Wenhua 1st Rd., Guishan Dist., Taoyuan City 33302, Taiwan.
  • Center for Reliability Engineering, Ming Chi University of Technology, No. 84, Gungjuan Road, Taishan District, New Taipei City 24301, Taiwan.
  • Li-Yin Technology Co., Ltd., No. 37, Lane 151, Section 1, Zhongxing Road, Wugu District, New Taipei City 24101, Taiwan.

ORCID-Profile: Chil-Chyuan Kuo

Förderung

  • the Ministry of Science and Technology of Taiwan

Zitieren

APA

Kuo, C. C., Chen, H. W., & Huang, S. H. (2023). Rotary Friction Welding of Dissimilar Polymer Rods Containing Metal Powder. Polymers, 15(22), 4354. https://doi.org/10.3390/polym15224354

Vancouver

Kuo CC, Chen HW, Huang SH. Rotary Friction Welding of Dissimilar Polymer Rods Containing Metal Powder. Polymers. 2023;15(22):4354. doi:10.3390/polym15224354

BibTeX
@article{Kuo2023,
  author = {Kuo, Chil-Chyuan and Chen, Hong-Wei and Huang, Song-Hua},
  title = {Rotary Friction Welding of Dissimilar Polymer Rods Containing Metal Powder},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {22},
  pages = {4354},
  doi = {10.3390/polym15224354}
}
Kostenlos starten →