EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Poly-Lactic Acid-Bagasse Based Bio-Composite for Additive Manufacturing

Silvia Carichino, Dino Scanferla, Daniela Fico iD, Daniela Rizzo iD, Francesca Ferrari iD, María Jordá-Reolid, Asunción Martínez-García iD, Carola Esposito Corcione iD

Polymers · 04.11.2023 · 15 (21) · 4323

DOI: 10.3390/polym15214323 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 04.11.2023. Verfasst von Silvia Carichino und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Engineering for Innovation, University of Salento, Edificio P, Campus Ecotekne, s.p. 6 Lecce-Monteroni, 73100 Lecce, Italy. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 69 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: IVACE.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Beer bagasse is a residue waste produced in great amounts; nevertheless, it is still underestimated in the industry. The aim of this paper is to develop an innovative and efficient methodology to recycle the beer bagasse by producing Poly-lactic acid(PLA)-based bio-composites, in the forms of pellets and filaments, to be used in additive manufacturing processes. To assess the suitability of beer bagasse for extrusion-based 3D printing techniques, it was, firstly, physically and chemically characterized. Then, it was added in combination with different kinds of plasticizers to PLA to make bio-composites, analyzing their thermal and physical properties. The results prove the great potential of bagasse, evidencing its printability. Both composites’ pellets and filaments were used in two different 3D printing machines and the mechanical properties of the 3D-printed models were evaluated as a function of the composition and the kind of technology used. All the used plasticizers improved processability and the polymer–bagasse interface. Compared to neat PLA, no changes in thermal properties were detected, but a lowering of the mechanical properties of the 3D-printed composites compared to the neat polymers was observed. Finally, a comparison between the efficiency of the two 3D printing techniques to be used with the bio-based composites was performed.

Schlagwörter

Stichwörter der Autor:innen

3D printingadditive manufacturingbagassebio-compositespoly-lactic acid (PLA)

Autor:innen und Institutionen

  • Department of Engineering for Innovation, University of Salento, Edificio P, Campus Ecotekne, s.p. 6 Lecce-Monteroni, 73100 Lecce, Italy.
  • Department of Cultural Heritage, University of Salento, via D. Birago 64, 73100 Lecce, Italy.
  • AIJU, Technological Institute for Children's Products and Leisure, Ibi, 03440 Alicante, Spain.

ORCID-Profile: Daniela Fico, Daniela Rizzo, Francesca Ferrari, Asunción Martínez-García, Carola Esposito Corcione

Förderung

  • IVACE

Zitieren

APA

Carichino, S., Scanferla, D., Fico, D., Rizzo, D., Ferrari, F., Jordá-Reolid, M., Martínez-García, A., & Corcione, C. E. (2023). Poly-Lactic Acid-Bagasse Based Bio-Composite for Additive Manufacturing. Polymers, 15(21), 4323. https://doi.org/10.3390/polym15214323

Vancouver

Carichino S, Scanferla D, Fico D, Rizzo D, Ferrari F, Jordá-Reolid M, et al. Poly-Lactic Acid-Bagasse Based Bio-Composite for Additive Manufacturing. Polymers. 2023;15(21):4323. doi:10.3390/polym15214323

BibTeX
@article{Carichino2023,
  author = {Carichino, Silvia and Scanferla, Dino and Fico, Daniela and Rizzo, Daniela and Ferrari, Francesca and Jordá-Reolid, María and Martínez-García, Asunción and Corcione, Carola Esposito},
  title = {Poly-Lactic Acid-Bagasse Based Bio-Composite for Additive Manufacturing},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {21},
  pages = {4323},
  doi = {10.3390/polym15214323}
}
Kostenlos starten →