EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Polyurethane Acrylate Oligomer (PUA) Microspheres Prepared Using the Pickering Method for Reinforcing the Mechanical and Thermal Properties of 3D Printing Resin

Xiaoliang Zhao, Hua Jiao, Bin Du, Kang Zhao

Polymers · 03.11.2023 · 15 (21) · 4320

DOI: 10.3390/polym15214320 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 03.11.2023. Verfasst von Xiaoliang Zhao und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Xi'an University of Technology, Xi'an 710048, China. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Shaanxi Province 2023 Technical Innovation Guidance Special Fund of China, Shaanxi Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Some photosensitive resins have poor mechanical properties after 3D printing. To overcome these limitations, a polyurethane acrylate oligomer (PUA) microsphere was prepared using the Pickering emulsion template method and ultraviolet (UV) curing technology in this paper. The prepared PUA microspheres were added to PUA-1,6-hexanediol diacrylate (HDDA) photosensitive resin system for digital light processing (DLP) 3D printing technology. The preparation process of PUA microspheres was discussed based on micromorphology, and it was found that the oil-water ratio of the Pickering emulsion and the emulsification speed had a certain effect on the microsphere size. As the oil-water ratio and the emulsification speed increased, the microsphere particle size decreased to a certain extent. Adding a suitable proportion of PUA microspheres to the photosensitive resin can improve the mechanical properties and thermal stability. When the modified photosensitive resin microsphere content was 0.5%, the tensile strength, elongation at break, bending strength, and initial thermal decomposition temperature were increased by 79.14%, 47.26%, 26.69%, and 10.65%, respectively, compared with the unmodified photosensitive resin. This study provides a new way to improve the mechanical properties of photosensitive resin 3D printing. The resin materials studied in this work have potential application value in the fields of ceramic 3D printing and dental temporary replacement materials.

Schlagwörter

Stichwörter der Autor:innen

3D printingPUA microspheresPickeringmechanical propertythermal stability

Autor:innen und Institutionen

  • School of Materials Science and Engineering, Xi'an University of Technology, Xi'an 710048, China.
  • School of Materials Science and Engineering, Xi'an Polytechnic University, Xi'an 710048, China.
  • Shaanxi Province Key Laboratory of Corrosion and Protection, Xi'an University of Technology, Xi'an 710048, China.

Förderung

  • Shaanxi Province 2023 Technical Innovation Guidance Special Fund of China
  • Shaanxi Natural Science Foundation of China

Zitieren

APA

Zhao, X., Jiao, H., Du, B., & Zhao, K. (2023). Polyurethane Acrylate Oligomer (PUA) Microspheres Prepared Using the Pickering Method for Reinforcing the Mechanical and Thermal Properties of 3D Printing Resin. Polymers, 15(21), 4320. https://doi.org/10.3390/polym15214320

Vancouver

Zhao X, Jiao H, Du B, Zhao K. Polyurethane Acrylate Oligomer (PUA) Microspheres Prepared Using the Pickering Method for Reinforcing the Mechanical and Thermal Properties of 3D Printing Resin. Polymers. 2023;15(21):4320. doi:10.3390/polym15214320

BibTeX
@article{Zhao2023,
  author = {Zhao, Xiaoliang and Jiao, Hua and Du, Bin and Zhao, Kang},
  title = {Polyurethane Acrylate Oligomer (PUA) Microspheres Prepared Using the Pickering Method for Reinforcing the Mechanical and Thermal Properties of 3D Printing Resin},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {21},
  pages = {4320},
  doi = {10.3390/polym15214320}
}
Kostenlos starten →