EUVIMEDEUVIMED entdecken
Crossref

Enhancing 3D printing sustainability: Reinforcing thermoplastic polyurethane with recycled polyurethane foam for durable applications in orthopedic footwear

Toaa Salama Mohamed, Ehssan Nassef, Ashraf Morsy, Hassan A. Ewais, Ahmed H. Abdel‐Salam, Ahmed Morsy, Nabil Mahmoud Abd El‐Moneim

Journal of Vinyl and Additive Technology · 2024-09 · 30 (5) · 1153-1163

DOI: 10.1002/vnl.22109 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Vinyl and Additive Technology, online erschienen am 30.04.2024. Verfasst von Toaa Salama Mohamed und 6 weiteren Autor:innen. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 50 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study seeks to advance the realm of 3D printing through the exploration of fabricating polymer matrix composite objects using recycled materials, with a particular emphasis on bolstering durability. Characterization was carried out by integrating polyurethane foam (PUF) residues into thermoplastic polyurethane (TPU) composites at different concentrations (ranging from 3% to 10% wt/wt), which are frequently employed in 3D printing. The chemical functions were analyzed using Fourier‐transform infrared spectroscopy (FTIR), while thermal stability was measured through thermal gravimetric analysis (TGA). The morphology characterized of the material via scanning electron microscopy (SEM) and density measurement identified that the surface roughness and void content of the PUF/TPU composite materials was a significant factor affecting the measured mechanical properties. Experimental results indicate that higher PUF content enhances filament properties and the resultant 3D printed products, showcasing a reduction in both the density and melt index of the produced filament by 15.9% and 34.4%, respectively, with the addition of 5% wt./wt. PUF residues to TPU. Additionally, there was a notable increase in Young's modulus of the produced filament by 79.9% and maximum stress by 12.7%, while elongation at break was reduced by 24.9%. Furthermore, the study highlights the sustainability advantages of utilizing recycled PUF, contributing to waste reduction and associated cost savings. Recycled PUF emerges as a cost‐effective additive for synthesizing 3D polymeric materials, holding promise for diverse applications such as orthopedic footwear, leveraging the desirable attributes of TPU. Highlights Recycled (PUF)/TPU composites for 3D printing, enhancing durability. PUF content improves filament properties, reducing density and melt index. Young's modulus and maximum stress of produced filament increases. Utilizing recycled PUF reduces waste and promises sustainability.

Zitieren

APA

Mohamed, T. S., Nassef, E., Morsy, A., Ewais, H. A., Abdel‐Salam, A. H., Morsy, A., & El‐Moneim, N. M. A. (2024). Enhancing 3D printing sustainability: Reinforcing thermoplastic polyurethane with recycled polyurethane foam for durable applications in orthopedic footwear. Journal of Vinyl and Additive Technology, 30(5), 1153-1163. https://doi.org/10.1002/vnl.22109

Vancouver

Mohamed TS, Nassef E, Morsy A, Ewais HA, Abdel‐Salam AH, Morsy A, et al. Enhancing 3D printing sustainability: Reinforcing thermoplastic polyurethane with recycled polyurethane foam for durable applications in orthopedic footwear. Journal of Vinyl and Additive Technology. 2024;30(5):1153-1163. doi:10.1002/vnl.22109

BibTeX
@article{Mohamed2024,
  author = {Mohamed, Toaa Salama and Nassef, Ehssan and Morsy, Ashraf and Ewais, Hassan A. and Abdel‐Salam, Ahmed H. and Morsy, Ahmed and El‐Moneim, Nabil Mahmoud Abd},
  title = {Enhancing 3D printing sustainability: Reinforcing thermoplastic polyurethane with recycled polyurethane foam for durable applications in orthopedic footwear},
  journal = {Journal of Vinyl and Additive Technology},
  year = {2024},
  volume = {30},
  number = {5},
  pages = {1153--1163},
  doi = {10.1002/vnl.22109}
}
Kostenlos starten →