EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Interfacial Bond Properties of Underwater Concrete Coated with Bisphenol A Epoxy Resins

Sungwon Kim iD, Jin-Hak Yi iD, Hyemin Hong, Seoung Ik Choi, Dongchan Kim, Min Ook Kim iD

Polymers · 01.11.2023 · 15 (21) · 4290

DOI: 10.3390/polym15214290 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 01.11.2023. Verfasst von Sungwon Kim und 5 weiteren Autor:innen. Beteiligte Einrichtung: Ocean Space Development and Energy Research Department, Korea Institute of Ocean Science and Technology, 385 Haeyang-ro, Yeongdo-gu, Busan 49111, Rep…. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 58 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Korea Institute of Ocean Science and Technology.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigated changes in the interfacial properties of epoxy-coated concrete exposed to various conditions, regarding the epoxy type, coating equipment, and exposure environment and period. The measured coating thickness and pull-off bond strength exhibited diverse trends, depending on the exposure period and conditions. In the real sea (RS) environment, the average bond strengths for bisphenol A (BPA) (E1), BPA with zinc powder (E2), and BPA with cresyl glycidyl ether (E3) were 1.26, 1.93, and 1.92 MPa, respectively. The coating method did not significantly affect the measured coating thickness and strength values. The conventional roller (D1) exhibited the highest thickness variation, with a value of 214.45 μm. The RS condition significantly increased the coating thickness (34% to 158%) compared to the tap water (TW) condition. The exposure conditions had little impact on bond strength except for E3, which showed an increased strength (2.71 MPa) over 7–91 days, especially under RS conditions, while E2 remained constant at approximately 1.82 MPa. This study offers insights into factors influencing marine concrete coating performance and discusses limitations and future work.

Schlagwörter

Stichwörter der Autor:innen

bond strengthconcrete substrateepoxy coatingexposure durationinterfacial propertiesmarine environment

Autor:innen und Institutionen

  • Ocean Space Development and Energy Research Department, Korea Institute of Ocean Science and Technology, 385 Haeyang-ro, Yeongdo-gu, Busan 49111, Republic of Korea.
  • Department of Civil Engineering, Seoul National University of Science and Technology, 232 Gongneung-ro, Nowon-gu, Seoul 01811, Republic of Korea.

ORCID-Profile: Sungwon Kim, Jin-Hak Yi, Min Ook Kim

Förderung

  • Korea Institute of Ocean Science and Technology

Zitieren

APA

Kim, S., Yi, J. H., Hong, H., Choi, S. I., Kim, D., & Kim, M. O. (2023). Interfacial Bond Properties of Underwater Concrete Coated with Bisphenol A Epoxy Resins. Polymers, 15(21), 4290. https://doi.org/10.3390/polym15214290

Vancouver

Kim S, Yi JH, Hong H, Choi SI, Kim D, Kim MO. Interfacial Bond Properties of Underwater Concrete Coated with Bisphenol A Epoxy Resins. Polymers. 2023;15(21):4290. doi:10.3390/polym15214290

BibTeX
@article{Kim2023,
  author = {Kim, Sungwon and Yi, Jin-Hak and Hong, Hyemin and Choi, Seoung Ik and Kim, Dongchan and Kim, Min Ook},
  title = {Interfacial Bond Properties of Underwater Concrete Coated with Bisphenol A Epoxy Resins},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {21},
  pages = {4290},
  doi = {10.3390/polym15214290}
}
Kostenlos starten →