EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Possibilities of Influencing the Crystallization Process of Bisphenol A- and Bisphenol F-Based Epoxy Resins Used for Hydrophobic Coatings on Concrete

Michaela Seidlová, Jakub Hodul iD, Nikol Žižková iD, Ruben Paul Borg iD

Polymers · 24.09.2023 · 15 (19) · 3871

DOI: 10.3390/polym15193871 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 24.09.2023. Verfasst von Michaela Seidlová und 3 weiteren Autor:innen. Beteiligte Einrichtung: IN-CHEMIE Technology s.r.o., 779 00 Olomouc, Czech Republic. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Czech Science Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Crystallization of bisphenol A (DGEBA)- and bisphenol F (DGEBF)-based epoxy resins is a natural property of these oligomers. However, manufacturers of coatings and other systems based on these epoxy resins are making efforts to slow down the crystallization process as much as possible, thereby extending the shelf life and improving the competitiveness of their products. This paper focuses on the kinetics of the crystallization process of epoxy resins and the effect of the presence of a certain degree of crystallinity on selected parameters of epoxy-based materials. Furthermore, an analysis of the impact of a certain degree of crystallinity of the epoxy base on the resulting coating parameters was carried out. The highest value of crystallinity (17%) was achieved in the sample containing the highest proportion of DGEBF in the crystallization phase “c”, and the enthalpy of melting (Ht) of the crystalline DGEBF sample was 6.3 J/g. Mechanical parameters as well as chemical and thermal resistance of hydrophobic epoxy systems were investigated. The best abrasion resistance (1.5 cm3/50 cm2) was achieved with the blend containing only amorphous DGEBA. The adhesion of the epoxy samples on concrete was greater than 6.5 MPa. The chemical resistance tests performed showed that, in general, the chemical resistance of epoxy systems decreases with increasing crystallinity content. The tighter arrangement of molecules in the crystalline regions of the epoxy matrix results in an increase in density, strength and hardness. This study presents a comprehensive examination of the crystallization of DGEBA and DGEBF, which is, as yet virtually unavailable. It also contributes to knowledge by outlining the possibility of speeding up or slowing down the crystallization process of epoxy resins, including the principle of selecting nucleating agents.

Schlagwörter

Stichwörter der Autor:innen

bisphenolchemical resistancecoatingscrystallizationepoxy resinglass transition temperaturemechanical parameters

Autor:innen und Institutionen

  • IN-CHEMIE Technology s.r.o., 779 00 Olomouc, Czech Republic.
  • Faculty of Civil Engineering, Brno University of Technology, 602 00 Brno, Czech Republic.
  • Faculty for the Built Environment, University of Malta, MSD 2080 Msida, Malta.

ORCID-Profile: Jakub Hodul, Nikol Žižková, Ruben Paul Borg

Förderung

  • Czech Science Foundation

Zitieren

APA

Seidlová, M., Hodul, J., Žižková, N., & Borg, R. P. (2023). Possibilities of Influencing the Crystallization Process of Bisphenol A- and Bisphenol F-Based Epoxy Resins Used for Hydrophobic Coatings on Concrete. Polymers, 15(19), 3871. https://doi.org/10.3390/polym15193871

Vancouver

Seidlová M, Hodul J, Žižková N, Borg RP. Possibilities of Influencing the Crystallization Process of Bisphenol A- and Bisphenol F-Based Epoxy Resins Used for Hydrophobic Coatings on Concrete. Polymers. 2023;15(19):3871. doi:10.3390/polym15193871

BibTeX
@article{Seidlov2023,
  author = {Seidlová, Michaela and Hodul, Jakub and Žižková, Nikol and Borg, Ruben Paul},
  title = {Possibilities of Influencing the Crystallization Process of Bisphenol A- and Bisphenol F-Based Epoxy Resins Used for Hydrophobic Coatings on Concrete},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {19},
  pages = {3871},
  doi = {10.3390/polym15193871}
}
Kostenlos starten →