EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Tribological Characterisation and Modelling for the Fused Deposition Modelling of Polymeric Structures under Lubrication Conditions

Feiyang He, Chenyan Xu, Muhammad Khan iD

Polymers · 17.10.2023 · 15 (20) · 4112

DOI: 10.3390/polym15204112 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 17.10.2023. Verfasst von Feiyang He und 2 weiteren Autor:innen. Beteiligte Einrichtung: Centre for Life-Cycle Engineering and Management, Cranfield University, Cranfield MK43 0AL, UK. Die Arbeit wurde bisher 24-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In recent years, additive manufacturing technology, particularly in plastic component fabrication, has gained prominence. However, fundamental modelling of the influence of materials like ABS, PC, and PLA on tribological properties in fused deposition modeling (FDM) remains scarce, particularly in non-lubricated, oil-lubricated, and grease-lubricated modes. This experimental study systematically investigates the effects of material type, lubrication method, layer thickness, and infill density on FDM component tribology. A tribology analysis is conducted using a TRB3 tribometer. The results indicate a coefficient of friction (CoF) range between 0.04 and 0.2, generally increasing and decreasing with layer thickness and filler density. The lubrication impact hinges on the material surface texture. The study models the intricate relationships between these variables via full-factor analysis, showing a strong alignment between the modelled and measured friction coefficients (an average error of 3.83%). Validation tests on different materials affirm the model’s reliability and applicability.

Schlagwörter

Stichwörter der Autor:innen

3D printingABSPCPLAcoefficient of frictioninfill densitylayer thicknesslubricationwear rate

Autor:innen und Institutionen

  • Centre for Life-Cycle Engineering and Management, Cranfield University, Cranfield MK43 0AL, UK.
  • School of Aerospace, Transport and Manufacturing, Cranfield University, Cranfield MK43 0AL, UK.

ORCID-Profile: Muhammad Khan

Zitieren

APA

He, F., Xu, C., & Khan, M. (2023). Tribological Characterisation and Modelling for the Fused Deposition Modelling of Polymeric Structures under Lubrication Conditions. Polymers, 15(20), 4112. https://doi.org/10.3390/polym15204112

Vancouver

He F, Xu C, Khan M. Tribological Characterisation and Modelling for the Fused Deposition Modelling of Polymeric Structures under Lubrication Conditions. Polymers. 2023;15(20):4112. doi:10.3390/polym15204112

BibTeX
@article{He2023,
  author = {He, Feiyang and Xu, Chenyan and Khan, Muhammad},
  title = {Tribological Characterisation and Modelling for the Fused Deposition Modelling of Polymeric Structures under Lubrication Conditions},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {20},
  pages = {4112},
  doi = {10.3390/polym15204112}
}
Kostenlos starten →