EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Optimization of Printing Parameters for Self-Lubricating Polymeric Materials Fabricated via Fused Deposition Modelling

Peiyang Zhang, Feiyang He, Muhammad Khan iD

Polymers · 20.05.2025 · 17 (10) · 1401

DOI: 10.3390/polym17101401 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 20.05.2025. Verfasst von Peiyang Zhang und 2 weiteren Autor:innen. Beteiligte Einrichtung: Centre for Life-Cycle Engineering and Management, Faculty of Applied Engineering and Science, Cranfield University, Bedford MK43 0AL, UK. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigated the feasibility of fabricating self-lubrication material using fused deposition modelling (FDM) technology, focusing on the influence of printing parameters on tribological performance. Experiments were conducted using PA and ABS materials, with varying printing speed, infill density, and layer height across four levels. The research established regression equations and fitted curves to describe the relationship between printing parameters and the coefficient of friction (CoF). Validation experiments demonstrated the reliability of the models, with errors within 10%. The results indicate that reducing printing speed and increasing infill density enhance surface quality, with infill density exerting a more significant effect. The influence of layer height on surface quality depends on the printer characteristics, making precise quantification challenging. Additionally, this study confirms that resin-based samples produced via FDM exhibit self-lubricating potential. These findings contribute to the optimization of FDM-printed structures by balancing surface quality and tribological performance.

Schlagwörter

Stichwörter der Autor:innen

3D printingcoefficient of frictioninfill densityprinting speedself-lubricating

Autor:innen und Institutionen

  • Centre for Life-Cycle Engineering and Management, Faculty of Applied Engineering and Science, Cranfield University, Bedford MK43 0AL, UK.

ORCID-Profile: Muhammad Khan

Zitieren

APA

Zhang, P., He, F., & Khan, M. (2025). Optimization of Printing Parameters for Self-Lubricating Polymeric Materials Fabricated via Fused Deposition Modelling. Polymers, 17(10), 1401. https://doi.org/10.3390/polym17101401

Vancouver

Zhang P, He F, Khan M. Optimization of Printing Parameters for Self-Lubricating Polymeric Materials Fabricated via Fused Deposition Modelling. Polymers. 2025;17(10):1401. doi:10.3390/polym17101401

BibTeX
@article{Zhang2025,
  author = {Zhang, Peiyang and He, Feiyang and Khan, Muhammad},
  title = {Optimization of Printing Parameters for Self-Lubricating Polymeric Materials Fabricated via Fused Deposition Modelling},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {10},
  pages = {1401},
  doi = {10.3390/polym17101401}
}
Kostenlos starten →