EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design of Experiments-Based Fire Performance Optimization of Epoxy and Carbon-Fiber-Reinforced Epoxy Polymer Composites

Christoph M Pöhler iD, Marwa Hamza, Torsten Kolb, Erik V Bachtiar, Libo Yan iD, Bohumil Kasal

Polymers · 16.10.2023 · 15 (20) · 4096

DOI: 10.3390/polym15204096 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 16.10.2023. Verfasst von Christoph M Pöhler und 5 weiteren Autor:innen. Beteiligte Einrichtung: Centre for Light and Environmentally-Friendly Structures, Fraunhofer Institute for Wood Research Wilhelm-Klauditz-Institut WKI, 38108 Braunschweig, G…. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fachagentur Nachwachsende Rohstoffe, Fachagentur Nachwachsende Rohstoffe e. V. (FNR, Agency for Renewable Resources), Bundesministerium für Ernährung und Landwirtschaft (BMEL, The German Federal Ministry of Food and Agriculture of Germany).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The fire performance of epoxy and carbon-fiber-reinforced polymer (CFRP) composites with and without fire retardants (FR) (i.e., ammonium polyphosphate (APP), aluminum trihydroxide (ATH), melamine (MEL), expandable graphite (EG)) was investigated. A design of experiment (DoE) approach was applied to study the single- and multifactorial effects of FR. The fire performance of epoxy and CFRP was evaluated by limiting the oxygen index (LOI) and heat release, which were obtained by limiting the oxygen index test and cone calorimetry. It was found that mixtures of 70 wt.-% epoxy, 24.6 wt.-% of APP, and 5.4 wt.-% MEL resulted in the highest LOI level of 45 within tested groups for epoxy resin and also for CFRP specimens (LOI level of 39). This mixture also resulted in the lowest average heat release rate (HRR180s) of 104 kW·m−2 and a spec. total heat release (THR600s) of 1.14 MJ·m−2·g−1, indicating the importance of balancing spumific and charring agents in intumescent systems and synergy thereof.

Schlagwörter

Stichwörter der Autor:innen

carbon fibersdesign of experimentsfire retardationthermosetting resin

Autor:innen und Institutionen

  • Centre for Light and Environmentally-Friendly Structures, Fraunhofer Institute for Wood Research Wilhelm-Klauditz-Institut WKI, 38108 Braunschweig, Germany.
  • Independent Researcher, 38108 Braunschweig, Germany.
  • Department of Organic and Wood-Based Construction Materials, Technische Universität Braunschweig, 38108 Braunschweig, Germany.

ORCID-Profile: Christoph M Pöhler, Libo Yan

Förderung

  • Fachagentur Nachwachsende Rohstoffe
  • Fachagentur Nachwachsende Rohstoffe e. V. (FNR, Agency for Renewable Resources)
  • Bundesministerium für Ernährung und Landwirtschaft (BMEL, The German Federal Ministry of Food and Agriculture of Germany)

Zitieren

APA

Pöhler, C. M., Hamza, M., Kolb, T., Bachtiar, E. V., Yan, L., & Kasal, B. (2023). Design of Experiments-Based Fire Performance Optimization of Epoxy and Carbon-Fiber-Reinforced Epoxy Polymer Composites. Polymers, 15(20), 4096. https://doi.org/10.3390/polym15204096

Vancouver

Pöhler CM, Hamza M, Kolb T, Bachtiar EV, Yan L, Kasal B. Design of Experiments-Based Fire Performance Optimization of Epoxy and Carbon-Fiber-Reinforced Epoxy Polymer Composites. Polymers. 2023;15(20):4096. doi:10.3390/polym15204096

BibTeX
@article{Phler2023,
  author = {Pöhler, Christoph M and Hamza, Marwa and Kolb, Torsten and Bachtiar, Erik V and Yan, Libo and Kasal, Bohumil},
  title = {Design of Experiments-Based Fire Performance Optimization of Epoxy and Carbon-Fiber-Reinforced Epoxy Polymer Composites},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {20},
  pages = {4096},
  doi = {10.3390/polym15204096}
}
Kostenlos starten →