Epoxy polymer composites reinforced using Caryota biofiber: fiber characterization, mechanical performance, and tribological behavior
International Polymer Processing · 25.11.2026 · 41 (5) · 598-614
DOI: 10.1515/ipp-2026-0068 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Polymer Processing, online erschienen am 29.09.2026. Verfasst von Ved Prakash und 7 weiteren Autor:innen. Die Arbeit nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
In this study, the potential of a novel Caryota (CY) biofiber as a reinforcement for epoxy-based polymer composites was systematically evaluated. The fiber was characterized using scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), and Fourier transform infrared (FTIR) spectroscopy to investigate its surface morphology, elemental composition, crystallographic structure, and chemical functional groups. The characterization results revealed a rough surface morphology, high carbon content, a semi-crystalline cellulose-rich structure, and functional groups favourable for effective fiber–matrix adhesion. Based on these characteristics, epoxy composites reinforced with 0, 10, 15, 20, and 25 wt% Caryota fiber were fabricated and evaluated for their mechanical and tribological performance. The composite containing 20 wt% fiber exhibited the highest tensile strength of 20.8 MPa, whereas the 15 wt% composite achieved the maximum flexural strength of 74.3 MPa. Erosive wear behaviour was investigated according to ASTM G76 under different impingement angles and impact velocities. The fiber-reinforced composites exhibited superior erosion resistance compared with neat epoxy, with the erosion mechanism transitioning from semi-ductile to semi-brittle behaviour as the impact velocity increased. Overall, the results demonstrate that Caryota biofiber is a promising, sustainable, and cost-effective reinforcement for polymer composites intended for structural and tribological applications.
Zitieren
APA
Prakash, V., Majhi, S., Pradhan, S., Acharya, S. K., Rajaram, P., Pandiarajan, N., Eswar, C. B. K., & Ayrilmis, N. (2026). Epoxy polymer composites reinforced using Caryota biofiber: fiber characterization, mechanical performance, and tribological behavior. International Polymer Processing, 41(5), 598-614. https://doi.org/10.1515/ipp-2026-0068
Vancouver
Prakash V, Majhi S, Pradhan S, Acharya SK, Rajaram P, Pandiarajan N, et al. Epoxy polymer composites reinforced using Caryota biofiber: fiber characterization, mechanical performance, and tribological behavior. International Polymer Processing. 2026;41(5):598-614. doi:10.1515/ipp-2026-0068
BibTeX
@article{Prakash2026,
author = {Prakash, Ved and Majhi, Sudhakar and Pradhan, Subhrajit and Acharya, Samir Kumar and Rajaram, Prithivirajan and Pandiarajan, Narayanasamy and Eswar, Chandra Bhargav Kondisetty and Ayrilmis, Nadir},
title = {Epoxy polymer composites reinforced using Caryota biofiber: fiber characterization, mechanical performance, and tribological behavior},
journal = {International Polymer Processing},
year = {2026},
volume = {41},
number = {5},
pages = {598--614},
doi = {10.1515/ipp-2026-0068}
}
EUVIMED