EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Preparation and Characterization of a Preformed Polyampholyte Particle Gel Composite for Conformance Control in Oil Recovery

Iskander Gussenov, Alexey Shakhvorostov, Aigerim Ayazbayeva iD, Nargiz Gizatullina, Alexey Klivenko iD, Sarkyt Kudaibergenov iD

Polymers · 15.10.2023 · 15 (20) · 4095

DOI: 10.3390/polym15204095 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 15.10.2023. Verfasst von Iskander Gussenov und 5 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Polymer Materials and Technology, Microregion "Atyrau 1", 3/1, Almaty 050019, Kazakhstan. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Science Committee of the Ministry of Science and High Education of the Republic of Kazakhstan, High Education of the Republic of Kazakhstan.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Preformed particle gels (PPGs) based on acrylamide (AAm), (3-acrylamidopropyl) trimethylammonium chloride (APTAC), and 2-acrylamido-2-methyl-1-propanesulfonic acid sodium salt (AMPS) were synthesized via conventional free radical copolymerization. The resultant PPGs of various compositions were characterized using FTIR spectroscopy, TG and DT analysis, and mechanical testing. The swelling behavior of PPGs depending on ionic strength, temperature, degree of crosslinking, and pH was also studied. The obtained results show that the swelling mechanism of PPGs is mainly due to the diffusion of the solvent. The mechanical properties of PPGs were improved by creating a composite polymer network by adding the clay mineral (bentonite) to the reaction mixture of monomers, which also makes it possible to control the Young’s modulus and the swelling degree of the samples.

Schlagwörter

Stichwörter der Autor:innen

AMPSAPTACYoung’s modulusacrylamidebentonitemechanical propertiespolyampholytepreformed particle gels (PPGs)reinforced hydrogelsswelling degreeswelling kinetic

Autor:innen und Institutionen

  • Institute of Polymer Materials and Technology, Microregion "Atyrau 1", 3/1, Almaty 050019, Kazakhstan.
  • Department of Chemical and Biochemical Engineering, Satbayev University, Almaty 050013, Kazakhstan.
  • Department of Human Ecology, Shakarim University of Semey, Semey 071412, Kazakhstan.

ORCID-Profile: Aigerim Ayazbayeva, Alexey Klivenko, Sarkyt Kudaibergenov

Förderung

  • Science Committee of the Ministry of Science and High Education of the Republic of Kazakhstan
  • High Education of the Republic of Kazakhstan

Zitieren

APA

Gussenov, I., Shakhvorostov, A., Ayazbayeva, A., Gizatullina, N., Klivenko, A., & Kudaibergenov, S. (2023). Preparation and Characterization of a Preformed Polyampholyte Particle Gel Composite for Conformance Control in Oil Recovery. Polymers, 15(20), 4095. https://doi.org/10.3390/polym15204095

Vancouver

Gussenov I, Shakhvorostov A, Ayazbayeva A, Gizatullina N, Klivenko A, Kudaibergenov S. Preparation and Characterization of a Preformed Polyampholyte Particle Gel Composite for Conformance Control in Oil Recovery. Polymers. 2023;15(20):4095. doi:10.3390/polym15204095

BibTeX
@article{Gussenov2023,
  author = {Gussenov, Iskander and Shakhvorostov, Alexey and Ayazbayeva, Aigerim and Gizatullina, Nargiz and Klivenko, Alexey and Kudaibergenov, Sarkyt},
  title = {Preparation and Characterization of a Preformed Polyampholyte Particle Gel Composite for Conformance Control in Oil Recovery},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {20},
  pages = {4095},
  doi = {10.3390/polym15204095}
}
Kostenlos starten →