EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Evaluation of Novel Preformed Particle Gel System for Conformance Control in Mature Oil Reservoirs

Abdulaziz Almakimi, Ahmed Ben Ali, Ibnelwaleed A Hussein iD, Baojun Bai

Gels · 17.01.2024 · 10 (1) · 70

DOI: 10.3390/gels10010070 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Gels, online erschienen am 17.01.2024. Verfasst von Abdulaziz Almakimi und 3 weiteren Autor:innen. Beteiligte Einrichtung: Petroleum Engineering Department, Missouri University of Science and Technology, Rolla, MO 65409, USA. Die Arbeit wurde bisher 28-mal zitiert (Crossref) und nennt 58 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Qatar National Research Fund (a member of Qatar Foundation), Al-Salam Petroleum Services Company.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To address challenges associated with excessive water production in mature oil reservoirs, this study introduces a carboxymethyl cellulose (CMC)-based material as a novel preformed particle gel (PPG) designed to plug excessive water pathways and redistribute the subsequent injected water toward unswept zones. Through microwave-assisted grafting copolymerization of CMC with acrylamide (AM), we successfully generated multi-sized dry particles within the range of 250–800 µm. Comprehensive analyses, including Fourier-transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM), have confirmed the chemical composition and morphology of the resulting carboxymethyl cellulose-grafted crosslinked polyacrylamide (CMC/PAMBA). Swelling kinetics and rheology tests were conducted to confirm the ability of this novel PPG system to perform at different reservoir conditions. The results of core flooding experiments showed that the CMC/PAMBA PPG is capable of plugging open fractures with a water breakthrough pressure gradient of up to 144 psi/ft. This preformed particle gel (PPG) system was designed specifically for application in Middle East reservoirs, which are distinguished by high salinity and elevated temperature levels. This PPG system is able to swell up to 10 times its original size in seawater and maintain a strength of about 1300 Pa at a temperature of 80 °C. Further optimization is conceivable to enhance injection efficiency and achieve superior plugging outcomes.

Schlagwörter

Stichwörter der Autor:innen

carboxymethyl celluloseconformance controlexcessive water productionplugging efficiencypreformed particle gel

Autor:innen und Institutionen

  • Petroleum Engineering Department, Missouri University of Science and Technology, Rolla, MO 65409, USA.
  • Gas Processing Center, Qatar University, Doha P.O. Box 2713, Qatar.

ORCID-Profile: Ibnelwaleed A Hussein

Förderung

  • Qatar National Research Fund (a member of Qatar Foundation)
  • Al-Salam Petroleum Services Company

Zitieren

APA

Almakimi, A., Ben Ali, A., Hussein, I. A., & Bai, B. (2024). Evaluation of Novel Preformed Particle Gel System for Conformance Control in Mature Oil Reservoirs. Gels, 10(1), 70. https://doi.org/10.3390/gels10010070

Vancouver

Almakimi A, Ben Ali A, Hussein IA, Bai B. Evaluation of Novel Preformed Particle Gel System for Conformance Control in Mature Oil Reservoirs. Gels. 2024;10(1):70. doi:10.3390/gels10010070

BibTeX
@article{Almakimi2024,
  author = {Almakimi, Abdulaziz and Ben Ali, Ahmed and Hussein, Ibnelwaleed A and Bai, Baojun},
  title = {Evaluation of Novel Preformed Particle Gel System for Conformance Control in Mature Oil Reservoirs},
  journal = {Gels},
  year = {2024},
  volume = {10},
  number = {1},
  pages = {70},
  doi = {10.3390/gels10010070}
}
Kostenlos starten →