EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Thermal and Mechanical Properties of Reprocessed Polylactide/Titanium Dioxide Nanocomposites for Material Extrusion Additive Manufacturing

Saltanat Bergaliyeva iD, David L Sales iD, José María Jiménez Cabello, Pedro Burgos Pintos iD, Natalia Fernández Delgado, Patricia Marzo Gago iD, Ann Zammit iD, Sergio I Molina iD

Polymers · 18.08.2023 · 15 (16) · 3458

DOI: 10.3390/polym15163458 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 18.08.2023. Verfasst von Saltanat Bergaliyeva und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Science and Metallurgical Engineering and Inorganic Chemistry, Algeciras School of Engineering and Technology, Universidad de…. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: JUNTA DE ANDALUCÍA, University of Cadiz's Support and Stimulus Plan for Research and Transfer, University of Cadiz’s Support and Stimulus Plan for Research and Transfer.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polylactic acid (PLA) is a biodegradable polymer that can replace petroleum-based polymers and is widely used in material extrusion additive manufacturing (AM). The reprocessing of PLA leads to a downcycling of its properties, so strategies are being sought to counteract this effect, such as blending with virgin material or creating nanocomposites. Thus, two sets of nanocomposites based respectively on virgin PLA and a blend of PLA and reprocessed PLA (rPLA) with the addition of 0, 3, and 7 wt% of titanium dioxide nanoparticles (TiO2) were created via a double screw extruder system. All blends were used for material extrusion for 3D printing directly from pellets without difficulty. Scanning electron micrographs of fractured samples’ surfaces indicate that the nanoparticles gathered in agglomerations in some blends, which were well dispersed in the polymer matrix. The thermal stability and degree of crystallinity for every set of nanocomposites have a rising tendency with increasing nanoparticle concentration. The glass transition and melting temperatures of PLA/TiO2 and PLA/rPLA/TiO2 do not differ much. Tensile testing showed that although reprocessed material implies a detriment to the mechanical properties, in the specimens with 7% nano-TiO2, this effect is counteracted, reaching values like those of virgin PLA.

Schlagwörter

Stichwörter der Autor:innen

additive manufacturingmaterial extrusionnanocompositepolylactic acidrecyclingtitanium dioxide

Autor:innen und Institutionen

  • Department of Materials Science and Metallurgical Engineering and Inorganic Chemistry, Algeciras School of Engineering and Technology, Universidad de Cádiz, INNANOMAT, IMEYMAT, Ramón Puyol Avenue, 11202 Algeciras, Cádiz…
  • Physics and Technology Department, Al-Farabi Kazakh National University, 71, Al-Farabi Avenue, Almaty 050040, Kazakhstan.
  • Department of Materials Science and Metallurgical Engineering and Inorganic Chemistry, Universidad de Cádiz, Campus Río S. Pedro, INNANOMAT, IMEYMAT, 11510 Puerto Real, Cádiz, Spain.
  • Department of Metallurgy & Materials Engineering, University of Malta, MSD 2080 Msida, Malta.

ORCID-Profile: Saltanat Bergaliyeva, David L Sales, Pedro Burgos Pintos, Patricia Marzo Gago, Ann Zammit, Sergio I Molina

Förderung

  • JUNTA DE ANDALUCÍA
  • University of Cadiz's Support and Stimulus Plan for Research and Transfer
  • University of Cadiz’s Support and Stimulus Plan for Research and Transfer

Zitieren

APA

Bergaliyeva, S., Sales, D. L., Jiménez Cabello, J. M., Burgos Pintos, P., Fernández Delgado, N., Marzo Gago, P., Zammit, A., & Molina, S. I. (2023). Thermal and Mechanical Properties of Reprocessed Polylactide/Titanium Dioxide Nanocomposites for Material Extrusion Additive Manufacturing. Polymers, 15(16), 3458. https://doi.org/10.3390/polym15163458

Vancouver

Bergaliyeva S, Sales DL, Jiménez Cabello JM, Burgos Pintos P, Fernández Delgado N, Marzo Gago P, et al. Thermal and Mechanical Properties of Reprocessed Polylactide/Titanium Dioxide Nanocomposites for Material Extrusion Additive Manufacturing. Polymers. 2023;15(16):3458. doi:10.3390/polym15163458

BibTeX
@article{Bergaliyeva2023,
  author = {Bergaliyeva, Saltanat and Sales, David L and Jiménez Cabello, José María and Burgos Pintos, Pedro and Fernández Delgado, Natalia and Marzo Gago, Patricia and Zammit, Ann and Molina, Sergio I},
  title = {Thermal and Mechanical Properties of Reprocessed Polylactide/Titanium Dioxide Nanocomposites for Material Extrusion Additive Manufacturing},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {16},
  pages = {3458},
  doi = {10.3390/polym15163458}
}
Kostenlos starten →