EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Optimization of 3D Printing Parameters for Enhanced Surface Quality and Wear Resistance

Alexandra Ileana Portoacă iD, Razvan George Ripeanu iD, Alin Diniță iD, Maria Tănase iD

Polymers · 16.08.2023 · 15 (16) · 3419

DOI: 10.3390/polym15163419 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 16.08.2023. Verfasst von Alexandra Ileana Portoacă und 3 weiteren Autor:innen. Beteiligte Einrichtung: Mechanical Engineering Department, Petroleum-Gas University of Ploiești, 100680 Ploiești, Romania. Die Arbeit wurde bisher 94-mal zitiert (Crossref) und nennt 77 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In recent years, there has been a growing interest in the field of 3D printing technology. Among the various technologies available, fused deposition modeling (FDM) has emerged as the most popular and widely used method. However, achieving optimal results with FDM presents a significant challenge due to the selection of appropriate process parameters. Therefore, the objective of this research was to investigate the impact of process parameters on the tribological and frictional behavior of acrylonitrile butadiene styrene (ABS) and polylactic acid (PLA) 3D-printed parts. The design of experiments (DOE) technique was used considering the input design parameters (infill percentage and layer thickness) as variables. The friction coefficient values and the wear were determined by experimental testing of the polymers on a universal tribometer employing plane friction coupling. Multi-response optimization methodology and analysis of variance (ANOVA) were used to highlight the dependency between the coefficient of friction, surface roughness parameters, and wear on the process parameters. The optimization analysis revealed that the optimal 3D printing input parameters for achieving the minimum coefficient of friction and linear wear were found to be an infill percentage of 50% and layer thickness of 0.1 mm (for ABS material), and an infill percentage of 50%, layer thickness of 0.15 mm (for PLA material). The suggested optimization methodology (which involves minimizing the coefficient of friction and cumulative linear wear) through the optimized parameter obtained provides the opportunity to select the most favorable design conditions contributing to a more sustainable approach to manufacturing by reducing overall material consumption.

Schlagwörter

Stichwörter der Autor:innen

3D printingABSPLAdesign of experimentsfriction coefficientinfill percentagelayer thicknessparametric optimizationroughnesswear

Autor:innen und Institutionen

  • Mechanical Engineering Department, Petroleum-Gas University of Ploiești, 100680 Ploiești, Romania.

ORCID-Profile: Alexandra Ileana Portoacă, Razvan George Ripeanu, Alin Diniță, Maria Tănase

Zitieren

APA

Portoacă, A. I., Ripeanu, R. G., Diniță, A., & Tănase, M. (2023). Optimization of 3D Printing Parameters for Enhanced Surface Quality and Wear Resistance. Polymers, 15(16), 3419. https://doi.org/10.3390/polym15163419

Vancouver

Portoacă AI, Ripeanu RG, Diniță A, Tănase M. Optimization of 3D Printing Parameters for Enhanced Surface Quality and Wear Resistance. Polymers. 2023;15(16):3419. doi:10.3390/polym15163419

BibTeX
@article{Portoac2023,
  author = {Portoacă, Alexandra Ileana and Ripeanu, Razvan George and Diniță, Alin and Tănase, Maria},
  title = {Optimization of 3D Printing Parameters for Enhanced Surface Quality and Wear Resistance},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {16},
  pages = {3419},
  doi = {10.3390/polym15163419}
}
Kostenlos starten →