EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

An Innovative Biofunctional Composite Hydrogel with Enhanced Printability, Rheological Properties, and Structural Integrity for Cell Scaffold Applications

Taufik Abdullah Mappa iD, Chung-Ming Liu, Chung-Chih Tseng iD, Muhammad Ruslin iD, Jui-Hung Cheng iD, Wen-Chien Lan iD, Bai-Hung Huang, Yung-Chieh Cho, Chia-Chien Hsieh, Hsin-Hui Kuo, Chen-Han Tsou, Yung-Kang Shen iD

Polymers · 28.07.2023 · 15 (15) · 3223

DOI: 10.3390/polym15153223 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 28.07.2023. Verfasst von Taufik Abdullah Mappa und 11 weiteren Autor:innen. Beteiligte Einrichtung: School of Dentistry, College of Oral Medicine, Taipei Medical University, Taipei 110, Taiwan. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Zuoying Armed Forces General Hospital, Zuoying Branch of Kaohsiung Armed Forces General Hospital.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The present study was conducted to manipulate various biomaterials to find potential hydrogel formulations through three-dimensional (3D) bioprinting fabrication for tissue repair, reconstruction, or regeneration. The hydrogels were prepared using sodium alginate and gelatin combined with different concentrations of Pluronic F127 (6% (3 g), 8% (4 g), and 10% (5 g)) and were marked as AGF-6%, AGF-8%, and AGF-10%, respectively. The properties of the hydrogels were investigated using a contact angle goniometer, rheometer, and 3D bioprinter. In addition, the osteoblast-like cell line (MG-63) was used to evaluate the cell viability including hydrogels before and after 3D bioprinting. It was found that the ratio of contact angle was lowest at AGF-6%, and the rheological results were higher for all samples of AGF-6%, AGF-8%, and AGF-10% compared with the control sample. The printability indicated that the AGF-6% hydrogel possessed great potential in creating a cell scaffold with shape integrity. Moreover, the live/dead assay also presented the highest numbers of live cells before printing compared with after printing. However, the number of live cells on day 7 was higher than on day 1 before and after printing (** p < 0.01). Therefore, the combination of AGF-6% could be developed as a biofunctional hydrogel formulation for potential tissue regeneration applications.

Schlagwörter

Stichwörter der Autor:innen

biopolymercell scaffoldhydrogelsprintabilitytissue regeneration

Autor:innen und Institutionen

  • School of Dentistry, College of Oral Medicine, Taipei Medical University, Taipei 110, Taiwan.
  • School of Dental Technology, College of Oral Medicine, Taipei Medical University, Taipei 110, Taiwan.
  • Department of Oral and Maxillofacial Surgery, Faculty of Dentistry, Hasanuddin University, Makassar 90245, Indonesia.
  • Department of Biomedical Engineering, College of Biomedical Engineering, China Medical University, Taichung 404, Taiwan.
  • Institute of Medical Science and Technology, National Sun Yat-sen University, Kaohsiung 804, Taiwan.
  • Department of Mold and Die Engineering, National Kaohsiung University of Science and Technology, Kaohsiung 807, Taiwan.

ORCID-Profile: Taufik Abdullah Mappa, Chung-Chih Tseng, Muhammad Ruslin, Jui-Hung Cheng, Wen-Chien Lan, Yung-Kang Shen

Förderung

  • Zuoying Armed Forces General Hospital
  • Zuoying Branch of Kaohsiung Armed Forces General Hospital

Zitieren

APA

Mappa, T. A., Liu, C. M., Tseng, C. C., Ruslin, M., Cheng, J. H., Lan, W. C., Huang, B. H., Cho, Y. C., Hsieh, C. C., Kuo, H. H., Tsou, C. H., & Shen, Y. K. (2023). An Innovative Biofunctional Composite Hydrogel with Enhanced Printability, Rheological Properties, and Structural Integrity for Cell Scaffold Applications. Polymers, 15(15), 3223. https://doi.org/10.3390/polym15153223

Vancouver

Mappa TA, Liu CM, Tseng CC, Ruslin M, Cheng JH, Lan WC, et al. An Innovative Biofunctional Composite Hydrogel with Enhanced Printability, Rheological Properties, and Structural Integrity for Cell Scaffold Applications. Polymers. 2023;15(15):3223. doi:10.3390/polym15153223

BibTeX
@article{Mappa2023,
  author = {Mappa, Taufik Abdullah and Liu, Chung-Ming and Tseng, Chung-Chih and Ruslin, Muhammad and Cheng, Jui-Hung and Lan, Wen-Chien and Huang, Bai-Hung and Cho, Yung-Chieh and Hsieh, Chia-Chien and Kuo, Hsin-Hui and Tsou, Chen-Han and Shen, Yung-Kang},
  title = {An Innovative Biofunctional Composite Hydrogel with Enhanced Printability, Rheological Properties, and Structural Integrity for Cell Scaffold Applications},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {15},
  pages = {3223},
  doi = {10.3390/polym15153223}
}
Kostenlos starten →