EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Rheological Characterization and Printability of Sodium Alginate–Gelatin Hydrogel for 3D Cultures and Bioprinting

Mohan Kumar Dey iD, Ram V Devireddy iD

Biomimetics · 04.01.2025 · 10 (1) · 28

DOI: 10.3390/biomimetics10010028 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biomimetics, online erschienen am 04.01.2025. Verfasst von Mohan Kumar Dey und 1 weiteren Autor:innen. Beteiligte Einrichtung: Bioengineering Laboratory, Department of Mechanical Engineering, Louisiana State University, Baton Rouge, LA 70803, USA. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: NIGMS NIH HHS, NIDDK NIH HHS, National Institute of Diabetes, Digestive and Kidney Diseases of the National Institutes of Health.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The development of biocompatible hydrogels for 3D bioprinting is essential for creating functional tissue models and advancing preclinical drug testing. This study investigates the formulation, printability, mechanical properties, and biocompatibility of a novel Alg-Gel hydrogel blend (alginate and gelatin) for use in extrusion-based 3D bioprinting. A range of hydrogel compositions were evaluated for their rheological behavior, including shear-thinning properties, storage modulus, and compressive modulus, which are crucial for maintaining structural integrity during printing and supporting cell viability. The printability assessment of the 7% alginate–8% gelatin hydrogel demonstrated that the 27T tapered needle achieved the highest normalized Printability Index (POInormalized = 1), offering the narrowest strand width (0.56 ± 0.02 mm) and the highest printing accuracy (97.2%) at the lowest printing pressure (30 psi). In contrast, the 30R needle, with the smallest inner diameter (0.152 mm) and highest printing pressure (80 psi), resulted in the widest strand width (0.70 ± 0.01 mm) and the lowest accuracy (88.8%), resulting in a POInormalized of 0.274. The 30T and 27R needles demonstrated moderate performance, with POInormalized values of 0.758 and 0.558, respectively. The optimized 7% alginate and 8% gelatin blend demonstrated favorable printability, mechanical strength, and cell compatibility with MDA-MB-213 breast cancer cells, exhibiting high cell proliferation rates and minimal cytotoxicity over a 2-week culture period. This formulation offers a balanced approach, providing sufficient viscosity for precision printing while minimizing shear stress to preserve cell health. This work lays the groundwork for future advancements in bioprinted cancer models, contributing to the development of more effective tools for drug screening and personalized medicine.

Schlagwörter

Stichwörter der Autor:innen

alginatebioprintinggelatinhydrogelrheological characterization

Autor:innen und Institutionen

  • Bioengineering Laboratory, Department of Mechanical Engineering, Louisiana State University, Baton Rouge, LA 70803, USA.

ORCID-Profile: Mohan Kumar Dey, Ram V Devireddy

Förderung

  • NIGMS NIH HHS
  • NIDDK NIH HHS
  • National Institute of Diabetes, Digestive and Kidney Diseases of the National Institutes of Health
  • Department of Mechanical Engineering at Louisiana State University

Zitieren

APA

Dey, M. K., & Devireddy, R. V. (2025). Rheological Characterization and Printability of Sodium Alginate–Gelatin Hydrogel for 3D Cultures and Bioprinting. Biomimetics, 10(1), 28. https://doi.org/10.3390/biomimetics10010028

Vancouver

Dey MK, Devireddy RV. Rheological Characterization and Printability of Sodium Alginate–Gelatin Hydrogel for 3D Cultures and Bioprinting. Biomimetics. 2025;10(1):28. doi:10.3390/biomimetics10010028

BibTeX
@article{Dey2025,
  author = {Dey, Mohan Kumar and Devireddy, Ram V},
  title = {Rheological Characterization and Printability of Sodium Alginate–Gelatin Hydrogel for 3D Cultures and Bioprinting},
  journal = {Biomimetics},
  year = {2025},
  volume = {10},
  number = {1},
  pages = {28},
  doi = {10.3390/biomimetics10010028}
}
Kostenlos starten →