Sound Absorption of the Absorber Composed of a Shunt Loudspeaker and Porous Materials in Tandem
Polymers · 15.07.2023 · 15 (14) · 3051
DOI: 10.3390/polym15143051 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 15.07.2023. Verfasst von Xin Li und 3 weiteren Autor:innen. Beteiligte Einrichtung: Xinjiang Institute of Engineering, Urumqi 830023, China. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Xinjiang Uygur Autonomous Region "Tianchi Talent" Introduction Program, Start-up fund for Ph.D. scientific research from Xinjiang Institute of Engineering, Basic research funds for colleges and universities in Xinjiang Uygur Autonomous Region.
Abstract (Originalsprache)
To investigate the sound absorption of the absorber composed of a shunt loudspeaker (SL) and porous materials (PM) in tandem, the normal absorption coefficients for six samples of different groups of parameters are measured using impedance tubes. It is shown that a composite structure consisting of a porous material, an air layer, a shunt loudspeaker, and an air layer arranged in sequence (PM + Air1 + SL + Air2) has the potential to achieve broadband sound absorption close to three octaves in the frequency range of 200–1600 Hz. To further explore the sound absorption mechanism of “PM + Air1 + SL + Air2”, a theoretical model based on the transfer matrix method is established, and a numerical model is built in the pressure acoustic module using COMSOL Multi-physics field software. The sound absorption coefficients and acoustic impedances predicted are in good agreement with those measured. The concerned “PM + Air1 + SL + Air2” with suitable parameters has two distinguishable sound absorption peaks in the low frequency domain and a well sound absorption spectrum similar to that of the porous material layer in the high-frequency domain. The reason for the superior sound absorption performance of “PM + Air1 + SL + Air2” lies in the fact that under the common action of the diaphragm’s mechanical vibration, the circuit’s damping loss, and the porous material’s viscous dissipation, the sound energy consumption is mainly dominated by SL in the low frequency domain and captured by PM in the high-frequency domain.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Xinjiang Institute of Engineering, Urumqi 830023, China.
- School of Mechanical & Automobile Engineering, Qingdao University of Technology, No. 777 Jialingjiang Road, Qingdao 266520, China.
Förderung
- Xinjiang Uygur Autonomous Region "Tianchi Talent" Introduction Program
- Start-up fund for Ph.D. scientific research from Xinjiang Institute of Engineering
- Basic research funds for colleges and universities in Xinjiang Uygur Autonomous Region
- Xinjiang Uygur Autonomous Region Youth Science and Technology Top Talent Project
- Xinjiang Uygur Autonomous Region “Tianchi Talent” Introduction Program
- Xinjiang Institute of Engineering
- Xinjiang Uygur Autonomous Region
Zitieren
APA
Li, X., Cao, Z., Xu, L., & Liu, B. (2023). Sound Absorption of the Absorber Composed of a Shunt Loudspeaker and Porous Materials in Tandem. Polymers, 15(14), 3051. https://doi.org/10.3390/polym15143051
Vancouver
Li X, Cao Z, Xu L, Liu B. Sound Absorption of the Absorber Composed of a Shunt Loudspeaker and Porous Materials in Tandem. Polymers. 2023;15(14):3051. doi:10.3390/polym15143051
BibTeX
@article{Li2023,
author = {Li, Xin and Cao, Zhigang and Xu, Lijun and Liu, Bilong},
title = {Sound Absorption of the Absorber Composed of a Shunt Loudspeaker and Porous Materials in Tandem},
journal = {Polymers},
year = {2023},
volume = {15},
number = {14},
pages = {3051},
doi = {10.3390/polym15143051}
}
EUVIMED