Multiple-tone sound absorber based on a multiple-branch shunted loudspeaker
Physica Scripta · 13.11.2026 · 101 (45) · 455904
DOI: 10.1088/1402-4896/aebbf9 ↗Kurz gefasst
Fachartikel in der Zeitschrift Physica Scripta, online erschienen am 09.11.2026. Verfasst von Xiaotian Li und 2 weiteren Autor:innen. Die Arbeit nennt 36 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Jiangxi Provincial Natural Science Foundation Project of China.
Abstract (Originalsprache)
Conventional passive sound absorbers are generally designed to achieve broadband sound absorption. However, low-frequency noise in aircraft cabins often contains pronounced discrete-frequency components. In this situation, broadband sound absorption may not always be necessary; instead, targeted sound absorption at prescribed discrete frequencies is desirable. To address this issue, this study proposes a multiple-tone sound absorber based on a multi-branch shunted loudspeaker (MBSL), in which a single loudspeaker is connected to multiple parallel inductor–capacitor–resistor (LCR) shunt circuits. An electromechanical-acoustic coupling model is established to derive the sound absorption coefficient of the proposed absorber. A two-stage parameter-design method is then developed. Analytical initial branch parameters are first obtained through local admittance matching, then a local coupling coefficient is introduced to evaluate the contribution of the non-target branches. Residual-admittance compensation is subsequently applied to refine the initial parameters and improve the total-admittance matching accuracy. Numerical results demonstrate that multiple absorption peaks can be obtained at the prescribed targeted frequencies. Furthermore, it is found that the resistance at each shunt branch mainly regulates the absorption-peak amplitude, whereas the branch inductance primarily controls the peak frequency. Three-branch impedance-tube experiments further confirm the local branch-regulation characteristics, while a simultaneous three-branch duct experiment demonstrates the capability of the proposed MBSL to regulate multiple acoustic responses using a single electroacoustic unit. The results demonstrate that the MBSL enables multiple-tone sound absorption at prescribed frequencies using only a single electroacoustic unit, with the absorption frequencies reconfigurable through adjustment of the LCR branch parameters.
Förderung
- National Natural Science Foundation of China
- Jiangxi Provincial Natural Science Foundation Project of China
Zitieren
APA
Li, X., Wang, J., & Mao, Q. (2026). Multiple-tone sound absorber based on a multiple-branch shunted loudspeaker. Physica Scripta, 101(45), 455904. https://doi.org/10.1088/1402-4896/aebbf9
Vancouver
Li X, Wang J, Mao Q. Multiple-tone sound absorber based on a multiple-branch shunted loudspeaker. Physica Scripta. 2026;101(45):455904. doi:10.1088/1402-4896/aebbf9
BibTeX
@article{Li2026,
author = {Li, Xiaotian and Wang, Junhui and Mao, Qibo},
title = {Multiple-tone sound absorber based on a multiple-branch shunted loudspeaker},
journal = {Physica Scripta},
year = {2026},
volume = {101},
number = {45},
pages = {455904},
doi = {10.1088/1402-4896/aebbf9}
}
EUVIMED