EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Surface Roughness and Grain Size Variation When 3D Printing Polyamide 11 Parts Using Selective Laser Sintering

Riccardo Tonello iD, Knut Conradsen iD, David Bue Pedersen iD, Jeppe Revall Frisvad iD

Polymers · 06.07.2023 · 15 (13) · 2967

DOI: 10.3390/polym15132967 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 06.07.2023. Verfasst von Riccardo Tonello und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Applied Mathematics and Computer Science, Technical University of Denmark, 2800 Kongens Lyngby, Denmark. Die Arbeit wurde bisher 24-mal zitiert (Crossref) und nennt 64 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union's H2020 research and innovation program, European Union’s H2020 research and innovation program, Innovation Fund Denmark.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Selective laser sintering (SLS) is a well-established technology that is used for additive manufacturing. Significant efforts have been made to improve SLS by optimizing the powder deposition, laser beam parameters, and temperature settings. The purpose is to ensure homogeneous sintering and prevent geometric and appearance inaccuracies in the manufactured objects. We evaluated the differences in the surface roughness and grain size of curved objects manufactured by using upcoming SLS technology that features two CO laser sources. Our analysis was carried out on polyamide 11 (PA11), which is a sustainable biobased polymer that has been gaining popularity due to its high-performance properties: its low melting point, high viscosity, and excellent mechanical properties. By using a Taguchi experimental design and analysis of variance (ANOVA), we examined the influence on the surface roughness and grain size of the build setup, the presence of thin walls, and the position of the sample on the powder bed. We found significant differences in some surface roughness and grain size measurements when these parameters were changed.

Schlagwörter

Stichwörter der Autor:innen

PA11SLSadditive manufacturingsurface roughness

Autor:innen und Institutionen

  • Department of Applied Mathematics and Computer Science, Technical University of Denmark, 2800 Kongens Lyngby, Denmark.
  • Department of Civil and Mechanical Engineering, Technical University of Denmark, 2800 Kongens Lyngby, Denmark.

ORCID-Profile: Riccardo Tonello, Knut Conradsen, David Bue Pedersen, Jeppe Revall Frisvad

Förderung

  • European Union's H2020 research and innovation program
  • European Union’s H2020 research and innovation program
  • Innovation Fund Denmark

Zitieren

APA

Tonello, R., Conradsen, K., Pedersen, D. B., & Frisvad, J. R. (2023). Surface Roughness and Grain Size Variation When 3D Printing Polyamide 11 Parts Using Selective Laser Sintering. Polymers, 15(13), 2967. https://doi.org/10.3390/polym15132967

Vancouver

Tonello R, Conradsen K, Pedersen DB, Frisvad JR. Surface Roughness and Grain Size Variation When 3D Printing Polyamide 11 Parts Using Selective Laser Sintering. Polymers. 2023;15(13):2967. doi:10.3390/polym15132967

BibTeX
@article{Tonello2023,
  author = {Tonello, Riccardo and Conradsen, Knut and Pedersen, David Bue and Frisvad, Jeppe Revall},
  title = {Surface Roughness and Grain Size Variation When 3D Printing Polyamide 11 Parts Using Selective Laser Sintering},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {13},
  pages = {2967},
  doi = {10.3390/polym15132967}
}
Kostenlos starten →