EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Fiber Loading on Thermal Properties of Cellulosic Washingtonia Reinforced HDPE Biocomposites

Safieddine Bahlouli, Ahmed Belaadi iD, Azzedine Makhlouf iD, Hassan Alshahrani iD, Mohammad K A Khan, Mohammed Jawaid iD

Polymers · 30.06.2023 · 15 (13) · 2910

DOI: 10.3390/polym15132910 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 30.06.2023. Verfasst von Safieddine Bahlouli und 5 weiteren Autor:innen. Beteiligte Einrichtung: Abbes Laghrour University, Khenchela 40000, Algeria. Die Arbeit wurde bisher 48-mal zitiert (Crossref) und nennt 86 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Deanship of Scientific Research at Najran University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this research work, we aim to study the effect of the incorporation of vegetable fiber reinforcement on the thermo-mechanical and dynamic properties of a composite formed by a polymeric matrix reinforced with cellulosic fibers with the various Washingtonia fiber (WF) loadings (0%, 10%, 20%, and 30% by wt%) as reinforced material in high-density polyethylene (HDPE) Biocomposites to evaluate the optimum fiber loading of biocomposites. In addition, several characterization techniques (i.e., thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), and thermal mechanical analysis (TMA)) were used to better understand the characteristics of the new composites prepared. With these techniques, we managed to verify the rigidity and thermal stability of the composites so elaborated, as well as the success of the polymer and the structural homogeneity of the obtained biocomposites. Hence, the biocomposite with the best ratio (HDPE/20WF) showed a loss modulus (E″) of 224 MPa, a storage modulus (E′) of 2079 MPa, and a damping factor (Tanδ) of 0.270 to the glass transition (Tg) of 145 °C. In addition, thermomechanical analysis (TMA) of the biocomposite samples exhibited marginally higher Ts compared to the HDPE matrix. The best results were recorded with biocomposites with 20% WF, which showed better thermal properties. This composite material can be used as insulation in construction materials (buildings, false ceilings, walls, etc.).

Schlagwörter

Stichwörter der Autor:innen

DMADSC/TGAHDPETMAWashingtonia fiberthermal stability

Autor:innen und Institutionen

  • Abbes Laghrour University, Khenchela 40000, Algeria.
  • Department of Mechanical Engineering, Faculty of Technology, University 20 Août 1955-Skikda, El-Hadaiek Skikda 21000, Algeria.
  • Department of Mechanical Engineering, College of Engineering, Najran University, Najran 1988, Saudi Arabia.
  • Scientific and Engineering Research Centre, Deanship of Scientific Research, Najran University, Najran 1988, Saudi Arabia.
  • Laboratory of Biocomposite Technology, Institute of Tropical Forestry and Forest Products (INTROP), Universiti Putra Malaysia, Serdang 43400, Selangor, Malaysia.

ORCID-Profile: Ahmed Belaadi, Azzedine Makhlouf, Hassan Alshahrani, Mohammed Jawaid

Förderung

  • Deanship of Scientific Research at Najran University

Zitieren

APA

Bahlouli, S., Belaadi, A., Makhlouf, A., Alshahrani, H., Khan, M. K. A., & Jawaid, M. (2023). Effect of Fiber Loading on Thermal Properties of Cellulosic Washingtonia Reinforced HDPE Biocomposites. Polymers, 15(13), 2910. https://doi.org/10.3390/polym15132910

Vancouver

Bahlouli S, Belaadi A, Makhlouf A, Alshahrani H, Khan MKA, Jawaid M. Effect of Fiber Loading on Thermal Properties of Cellulosic Washingtonia Reinforced HDPE Biocomposites. Polymers. 2023;15(13):2910. doi:10.3390/polym15132910

BibTeX
@article{Bahlouli2023,
  author = {Bahlouli, Safieddine and Belaadi, Ahmed and Makhlouf, Azzedine and Alshahrani, Hassan and Khan, Mohammad K A and Jawaid, Mohammed},
  title = {Effect of Fiber Loading on Thermal Properties of Cellulosic Washingtonia Reinforced HDPE Biocomposites},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {13},
  pages = {2910},
  doi = {10.3390/polym15132910}
}
Kostenlos starten →