Recent Advances on 3D-Printed Zirconia-Based Dental Materials: A Review
Materials · 24.02.2023 · 16 (5) · 1860
DOI: 10.3390/ma16051860 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Materials, online erschienen am 24.02.2023. Verfasst von Ana Catarina Branco und 3 weiteren Autor:innen. Beteiligte Einrichtung: Centro de Química Estrutural (CQE), Departamento de Engenharia Química, Institute of Molecular Sciences, Instituto Superior Técnico, Universidade de …. Die Arbeit wurde bisher 109-mal zitiert (Crossref) und nennt 95 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fundação para a Ciência e Tecnologia, Fundação para a Ciência e a Tecnologia (FCT).
Abstract (Originalsprache)
Zirconia-based materials are widely used in dentistry due to their biocompatibility and suitable mechanical and tribological behavior. Although commonly processed by subtractive manufacturing (SM), alternative techniques are being explored to reduce material waste, energy consumption and production time. 3D printing has received increasing interest for this purpose. This systematic review intends to gather information on the state of the art of additive manufacturing (AM) of zirconia-based materials for dental applications. As far as the authors know, this is the first time that a comparative analysis of these materials’ properties has been performed. It was performed following the PRISMA guidelines and using PubMed, Scopus and Web of Science databases to select studies that met the defined criteria without restrictions on publication year. Stereolithography (SLA) and digital light processing (DLP) were the techniques most focused on in the literature and the ones that led to most promising outcomes. However, other techniques, such as robocasting (RC) and material jetting (MJ), have also led to good results. In all cases, the main concerns are centered on dimensional accuracy, resolution, and insufficient mechanical strength of the pieces. Despite the struggles inherent to the different 3D printing techniques, the commitment to adapt materials, procedures and workflows to these digital technologies is remarkable. Overall, the research on this topic can be seen as a disruptive technological progress with a wide range of application possibilities.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Centro de Química Estrutural (CQE), Departamento de Engenharia Química, Institute of Molecular Sciences, Instituto Superior Técnico, Universidade de Lisboa, Av. Rovisco Pais, 1049-001 Lisbon, Portugal.
- Centro de Desenvolvimento de Produto e Transferência de Tecnologia, Department of Mechanical Engineering, Escola Superior de Tecnologia de Setúbal, Instituto Politécnico de Setúbal, Estefanilha, 2910-761 Setúbal, Portug…
- Centro de Investigação Interdisciplinar Egas Moniz, Instituto Universitário Egas Moniz, Quinta da Granja, Monte de Caparica, 2829-511 Caparica, Portugal.
- Departamento de Engenharia Mecânica, Instituto de Engenharia Mecânica, Instituto Superior Técnico, Universidade de Lisboa, 1049-001 Lisboa, Portugal.
- Center of Physics and Engineering of Advanced Materials, Instituto Superior Técnico, University of Lisbon, Av. Rovisco Pais, 1049-001 Lisboa, Portugal.
ORCID-Profile: Rogério Colaço, Ana Paula Serro
Förderung
- Fundação para a Ciência e Tecnologia
- Fundação para a Ciência e a Tecnologia (FCT)
Zitieren
APA
Branco, A. C., Colaço, R., Figueiredo-Pina, C. G., & Serro, A. P. (2023). Recent Advances on 3D-Printed Zirconia-Based Dental Materials: A Review. Materials, 16(5), 1860. https://doi.org/10.3390/ma16051860
Vancouver
Branco AC, Colaço R, Figueiredo-Pina CG, Serro AP. Recent Advances on 3D-Printed Zirconia-Based Dental Materials: A Review. Materials. 2023;16(5):1860. doi:10.3390/ma16051860
BibTeX
@article{Branco2023,
author = {Branco, Ana Catarina and Colaço, Rogério and Figueiredo-Pina, Célio Gabriel and Serro, Ana Paula},
title = {Recent Advances on 3D-Printed Zirconia-Based Dental Materials: A Review},
journal = {Materials},
year = {2023},
volume = {16},
number = {5},
pages = {1860},
doi = {10.3390/ma16051860}
}
EUVIMED