EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Enhancement of Energy Storage Performance of PMMA/PVDF Composites by Changing the Crystalline Phase through Heat Treatment

Changhai Zhang, Xu Tong, Zeyang Liu, Yue Zhang, Tiandong Zhang, Chao Tang, Xianli Liu, Qingguo Chi

Polymers · 28.05.2023 · 15 (11) · 2486

DOI: 10.3390/polym15112486 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 28.05.2023. Verfasst von Changhai Zhang und 7 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Engineering Dielectrics and Its Application, Ministry of Education, Harbin University of Science and Technology, Harbin 150080, Chi…. Die Arbeit wurde bisher 43-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of Heilongjiang Province of China, National Natural Science Foundation of China, Heilongjiang Postdoctoral Financial Assistance.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In today’s contemporary civilization, there is a growing need for clean energy focused on preserving the environment; thus, dielectric capacitors are crucial equipment in energy conversion. On the other hand, the energy storage performance of commercial BOPP (Biaxially Oriented Polypropylene) dielectric capacitors is relatively poor; hence, enhancing their performance has drawn the attention of an increasing number of researchers. This study used heat treatment to boost the performance of the composite made from PMAA and PVDF, combined in various ratios with good compatibility. The impacts of varying percentages of PMMA-doped PMMA/PVDF mixes and heat treatment at varying temperatures were systematically explored for their influence on the attributes of the blends. After some time, the blended composite’s breakdown strength improves from 389 kV/mm to 729.42 kV/mm at a processing temperature of 120 °C. Consequently, the energy storage density is 21.12 J/cm3, and the discharge efficiency is 64.8%. The performance has been significantly enhanced compared to PVDF in its purest state. This work offers a helpful technique for designing polymers that perform well as energy storage materials.

Schlagwörter

Stichwörter der Autor:innen

composite dielectricenergy storageheat treatmenthigh breakdown strengthpoly(vinylidene fluoride)

Autor:innen und Institutionen

  • Key Laboratory of Engineering Dielectrics and Its Application, Ministry of Education, Harbin University of Science and Technology, Harbin 150080, China.
  • School of Electrical and Electronic Engineering, Harbin University of Science and Technology, Harbin 150080, China.
  • Key Laboratory of Advanced Manufacturing and Intelligent Technology, Ministry of Education, Harbin University of Science and Technology, Harbin 150080, China.

Förderung

  • Natural Science Foundation of Heilongjiang Province of China
  • National Natural Science Foundation of China
  • Heilongjiang Postdoctoral Financial Assistance
  • University Nursing Program for Young Scholars with Creative Talents in Heilongjiang Province

Zitieren

APA

Zhang, C., Tong, X., Liu, Z., Zhang, Y., Zhang, T., Tang, C., Liu, X., & Chi, Q. (2023). Enhancement of Energy Storage Performance of PMMA/PVDF Composites by Changing the Crystalline Phase through Heat Treatment. Polymers, 15(11), 2486. https://doi.org/10.3390/polym15112486

Vancouver

Zhang C, Tong X, Liu Z, Zhang Y, Zhang T, Tang C, et al. Enhancement of Energy Storage Performance of PMMA/PVDF Composites by Changing the Crystalline Phase through Heat Treatment. Polymers. 2023;15(11):2486. doi:10.3390/polym15112486

BibTeX
@article{Zhang2023,
  author = {Zhang, Changhai and Tong, Xu and Liu, Zeyang and Zhang, Yue and Zhang, Tiandong and Tang, Chao and Liu, Xianli and Chi, Qingguo},
  title = {Enhancement of Energy Storage Performance of PMMA/PVDF Composites by Changing the Crystalline Phase through Heat Treatment},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {11},
  pages = {2486},
  doi = {10.3390/polym15112486}
}
Kostenlos starten →